PIAA DRL/SIDE/FOG Bulb Upgrades With Pics

[mikeypur]

Have you got a link for the LED interior bulbs? I'm keen to change mine aswell

[mikeypur]

Ordered a set of the interior leds off eBay and fitted them this weekend - nice upgrade, def recommend changing the over!

[DazN]

Are these the ones you bought?

http://www.ebay.co.uk/itm/INTERIOR-LED- ... 502wt_1185

I've got LED's + resistors wired for DRL and side lights, also got Dectane's fitted at the rear, interior set would be nice.

[mikeypur]

yes mate, thats the ones that i ordered.
like you say, finishes it off nicely!

[alex020869]

I changed all my interior lights to LED and can definitely recommend it. They look so good especially at night.

Alex

[FogsterOne]

Hi there been slowly replacing my yellow OEM bulbs- drl were easy and perfect now with PIAA, but just fitted the led side light replacements (PIAA ones that look like to LEDs in place of the old bulb) and they appear to be flashing of pulsing- not completely off but there is definitely a twinkle - its also in sync across both lights. Anyone had this before.... help!

[PetrolDave]

Hi there been slowly replacing my yellow OEM bulbs- drl were easy and perfect now with PIAA, but just fitted the led side light replacements (PIAA ones that look like to LEDs in place of the old bulb) and they appear to be flashing of pulsing- not completely off but there is definitely a twinkle - its also in sync across both lights. Anyone had this before.... help!

That's the bulb failure system detecting that the LEDs are taking so little current that it thinks they are blown incandescent bulbs.

You either need LEDs that don't trigger the bulb failure warning system (not all that claim to do that actually work) or resistors in parallel.

[EuroSag]

Sorry for holy thread resurrection.... but, can the warning display be removed using Vag-Com?

Fancy the LED's, but really don't want to start installing resistors - as in my opinion it's a paradox to use low energy components only to then put resistors in to artifically increase the load... and all just to remove some silly warning display...

The less load on the electrical system and alternator, the more fuel efficient it will be too....

[P_G]

[pDkALO]

Sorry for holy thread resurrection.... but, can the warning display be removed using Vag-Com

Nope!

[ArthurPE]

user61759_pic52670_1351696218.jpg

[Revolution]

Sorry for holy thread resurrection.... but, can the warning display be removed using Vag-Com?

Fancy the LED's, but really don't want to start installing resistors - as in my opinion it's a paradox to use low energy components only to then put resistors in to artifically increase the load... and all just to remove some silly warning display...

The less load on the electrical system and alternator, the more fuel efficient it will be too....

Hi All

We sell LED sidelight bulbs that are CANBUS compatible, they won't flicker or cause light warnings.

Here is a link

http://www.revolution247.com/catalogue/ ... -sidelight

CheeRS

Little Glen

[Andyy]

Won't need the resistor mod with these right? Just simple plug and play?

[Trups]

not with the Halogens.

Il have a error free kit ready thats plug and play for the DRL's.

[Andyy]

When's that Trups? I'm looking for drl's and sidelights but without having to butcher the car lol