Anyone want a Milltek Exhaust System for an RS4?

Post by **PetrolDave** » Sun Jan 30, 2011 8:18 pm

Guernsey70 wrote:The previous owner spent £2,700 on the system and £400 on the re-map. With VAT - £3,500.

He was ripped off - I've never seen a non-res valved Miltek cost more than £1800.

Post by **Guernsey70** » Sun Jan 30, 2011 8:18 pm

Dk, it's a 200 cell

Post by **Guernsey70** » Sun Jan 30, 2011 8:25 pm

Probably didn't shop around or negotiate. Anyway, i'll be happy as long as I can get a decent enough price for it and a replacement. That's the challenge at the mo.

Post by **HYFR** » Sun Jan 30, 2011 8:34 pm

if its 200cell then it includes sports CATs ....

Post by **adsgreen** » Sun Jan 30, 2011 10:33 pm

And sports cats will add to the noise lots.

Post by **HYFR** » Sun Jan 30, 2011 10:36 pm

if its sport cats, and you dont like the noise ... I'd change the cats, and stick with the cat back

considering its got valves, it shouldnt be too much louder than stock when valves shut ... and then you get to unleash thunder when you want to

Post by **daviesd** » Mon Jan 31, 2011 12:32 am

Hi there

Have you still got it?

Are you based in guernsey? I am just over the water in jersey.

Cheers

David

Post by **P_G** » Mon Jan 31, 2011 10:34 am

aka_dk wrote:if its sport cats, and you dont like the noise ... I'd change the cats, and stick with the cat back

considering its got valves, it shouldnt be too much louder than stock when valves shut ... and then you get to unleash thunder when you want to

+1

Take the sports cats out and the noise is about half what it is now, just about OEM sport mode with valves shut and a bit louder with them open. It also depends on whether it is resonated or non resonated; the latter is louder.

You'll have to have the remap taken off as well as it is tuned to hi flow cats, not the OEM ones. It will ride very rough if you don't.

Post by **steve_70** » Mon Jan 31, 2011 12:47 pm

Could be interested in this please. Can you confirm if resonated or not.... only really interested in Non Res TBH.

Thanks

Post by **S4Player** » Mon Jan 31, 2011 1:10 pm

Would be a great buy for you steve will match up with the 100cells you've got from me nicely

Post by **steve_70** » Mon Jan 31, 2011 1:23 pm

Yep, thats what I am hoping

....I have just PM'd Doug as well for a quote for a non res- valved and non valved also. Waiting to hear back. Re the detailing just about to PM you, see if we can work something for you.

Post by **ShaneyB** » Mon Jan 31, 2011 1:30 pm

Would it be worth us enquiring about a Milltek bulk buy?

Post by **steve_70** » Mon Jan 31, 2011 1:37 pm

Shagga wrote:Would it be worth us enquiring about a Milltek bulk buy?

We can only try... MRC I guess... best we start a new thread i reckon

Post by **steve_70** » Mon Jan 31, 2011 1:43 pm

Dannyrs4 wrote:Would be a great buy for you steve will match up with the 100cells you've got from me nicely

PM sent.... but the PM system on here is a bit Shonky sometimes, so you may get it next week

In essence When is the car at Dougs until please, and will see what I can shuffle about... but have hijacked this thread now (and the other one) so sorry to the OP

Post by **James997** » Mon Jan 31, 2011 2:32 pm

I called MRC a couple of weeks ago and was quoted around £ 1600 +Vat +fitting. If £1400 is correct I would be v interested in going there to get one fitted .

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Anyone want a Milltek Exhaust System for an RS4?

Who is online