Getting Started with Power

1.8 I4 20v turbo - 207bhp
1.8 I4 20v turbo - 222bhp
Post Reply
User avatar
army_004
Neutral
Posts: 9
Joined: Thu May 10, 2007 2:36 pm
Location: Prudhoe - Newcastle

Getting Started with Power

Post by army_004 » Thu May 10, 2007 2:48 pm

Hi there! ive just bought my S3, i want to start with getting some more power! What should i start with? K & N? Dump valve?(i know it doesnt give you power) :lol: HELP!! its an 2000 year model!

david7m
Top Gear
Posts: 2117
Joined: Sat Sep 13, 2003 5:52 pm
Location: West Midlands, UK

RE: Getting Started with Power

Post by david7m » Thu May 10, 2007 2:59 pm

Hi

External dump valves don't work, plus you'll sound a <beep> ;)

Panel filters help the engine breathe better, not sure of the benefits if a standard engine.

I would recommend getting it chipped, approx. £500 and will increase to approx. 265bhp :thumbs: If you do this, panel filter recommended. I have a Jetex one from Halfords, about £40.

Dave
APR 270bhp S3, Mixer K6 750

Cheap performance tip - lie the rear seats flat Image

User avatar
BlackS3
2nd Gear
Posts: 118
Joined: Mon Jan 23, 2006 11:05 am

RE: Getting Started with Power

Post by BlackS3 » Fri May 18, 2007 9:50 am

Yeah leave the DV alone unless you go for a bailey piston recirculator type. Don't really need it unless your going for big power. Stay away from K & N filters they are good for most cars but alot of my friends have had problems with their maf's soon after fitting them to VAG cars. Jabbasport do a nice CAI kit. I recommend an exhaust and remap u can't go wrong and the difference will be very surprising.

Dave, out of interest, have u had your MAF checked since u fitted filter? I hear alot of mixed views on filters and oiling up the MAFs. I'm going to have my MAF cleaned twice a year and new one every 2yrs just to be sure. Don't wanna melt a piston now do we....

david7m
Top Gear
Posts: 2117
Joined: Sat Sep 13, 2003 5:52 pm
Location: West Midlands, UK

RE: Getting Started with Power

Post by david7m » Fri May 18, 2007 10:02 am

I have replaced the MAF thinking it would cure another problem, but it didn't :( I have had my filter in four about 3 years, cleaned it three times and oiled twice! I think over oiling it causes the MAF problem.....

How long are filters supposed to last, I know K&N are 1 million miles :?

Dave
APR 270bhp S3, Mixer K6 750

Cheap performance tip - lie the rear seats flat Image

User avatar
BlackS3
2nd Gear
Posts: 118
Joined: Mon Jan 23, 2006 11:05 am

RE: Getting Started with Power

Post by BlackS3 » Fri May 18, 2007 10:13 am

They aren't all that expensive so i'd probably change it every 2yrs.

david7m
Top Gear
Posts: 2117
Joined: Sat Sep 13, 2003 5:52 pm
Location: West Midlands, UK

RE: Getting Started with Power

Post by david7m » Fri May 18, 2007 10:31 am

I think I paid £40.

Dave
APR 270bhp S3, Mixer K6 750

Cheap performance tip - lie the rear seats flat Image

User avatar
BlackS3
2nd Gear
Posts: 118
Joined: Mon Jan 23, 2006 11:05 am

RE: Getting Started with Power

Post by BlackS3 » Mon May 21, 2007 9:39 am

Is there any sound difference using an uprated panel filter? I'm undecided whether to stay standard or not with the air filter. I'm saving for the FMIC cos when it gets down to 12degrees or lower my car turns into a rocket.

Post Reply

Return to “S3 (Typ 8L) 1999-2003”

Who is online

Users browsing this forum: No registered users and 35 guests