RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Hi
I have got a set of Recaro seats from the b7 S4 and have a question. On the subframe there is a cross brace upon which a little motor is mounted. The cross brace spans between the 2 seat runners that bolt to the floor, and is mounted approximately half way down the runners. The cross brace on the seats I have bought is loose and moves about, it has 2 fixing holes at each side which looks like there was a fixing into the seat runners. Could anybody tell me what these fixings need to be ?? Or post up a pic showing the fixings ?
Any help/info would be greatly appreciated. Many thanks

has nobody got a pic..........???

Can you post a pic up of yours?

Here are some pics showing the missing fixings



[/img]

Well I tried to upload a pic of my S4 seat but failed miserably, couldn't get the small file into the gallery to link to. Basically where you have highlighted I have a couple of quite large hex headed bolts so you do have some screws missing.

A pic of mine

thanks for the pic gottanS, yes I have some missing fixings.......cant buy them seperate from audi so gonna have to try and work out a fixing method myself

See if you can get some bolts with the same thread - only needs to be same length and thread - the torx head doesn't matter a great deal.

You might be able to get the bolts from Audi - ETKA lists loads of bolts when you look in it....