abs

[paulm846]

hi all, i have a mate who's abs seems to judder when slowing down but only in the last few yards and braking softly. we have checked all the abs rings and cleaned them but it is still doing it, any ideas ?
thanks
paul

[Stigter]

make sure the abs sensors are push in all the way. they are only pushed into place. If they have moved might be causing the problem no reading right.

[Mikey-S]

Don't leave them pushed all the way in as they will rub on the abs ring on the cv joint. Push them in then pull them back out approx 1mm. What you're looking for is equal gaps on all four abs sensors.