Brembo on ebay
Brembo on ebay
Just seen these on ebay... http://cgi.ebay.co.uk/BREMBO_W0QQitemZ8 ... dZViewItem
The seller states that they are correct to go on an S4 using A8 disc's. Could this be for real or is he talking out of his back side?
Thanks
Mark
The seller states that they are correct to go on an S4 using A8 disc's. Could this be for real or is he talking out of his back side?
Thanks
Mark
RE: Brembo on ebay
I want!!!!
RE: Brembo on ebay
I wouldnt do that to you Mr B!! I dont have the funds at the moment anyway.
RE: Brembo on ebay
I haven't seen too many of these before, so I can't be 100%, but I wouldn't have thought that the interconnecting pipes nor the pistons themselves should be powder coated !!!! I'd be asking questions about how new they actually are!
If they are the 6-pot Porsche cayenne caliper, then they will fit straight onto the S4 uprights, but you need larger discs to match!
Nige.
If they are the 6-pot Porsche cayenne caliper, then they will fit straight onto the S4 uprights, but you need larger discs to match!
Nige.
Last edited by Nige_RS4 on Fri Feb 24, 2006 2:34 pm, edited 2 times in total.
RE: Brembo on ebay
I think you'll find he's right. They do look like the GT3/Cayenne 6 pot which will fit with an A8 disc on most Audis, provided you have 18inch wheels. Having said that I'm not an expert your honour 
-
tartan_rob
- Cruising
- Posts: 2990
- Joined: Thu Sep 04, 2003 1:45 pm
- Location: Swindon, Wilts
RE: Brembo on ebay
Stick with the Brembo RS6 8 pot's....you know where you are with them...
2017 Kawasaki Z1000
2014 RS6
2014 S1
2014 RS6
2014 S1
RE: Brembo on ebay
call me stupid but when u powder coat summit like calipers dont u have to remove the pistons cos the seals melt due to the high temp,s ?? the ends of these pistons are yellow..were they removed
if so then were they cleaned off and new seals fitted..and are they fitted correctly..
well i no what brakes im gonna get..and it aint them..
nige 
GARTH ROAD MOT CENTRE LTD
Unit 2 1-7 Amenity Way Garth rd Morden Surrey SM4 4AX
Exhausts,Clutches,Diagnostics,Tyres,Servicing and Air Conditioning
Opening soon is our new motorcycle Mot bay
020 83353032
Unit 2 1-7 Amenity Way Garth rd Morden Surrey SM4 4AX
Exhausts,Clutches,Diagnostics,Tyres,Servicing and Air Conditioning
Opening soon is our new motorcycle Mot bay
020 83353032
RE: Brembo on ebay
And what's the point of upgrading your brakes and using DOT4 fluid - you want minimum DOT5, but preferably Castrol SRF or equivalent!!! And why 3 litres of the stuff?
RE: Brembo on ebay
hey maybe theres enough fluid to do a few miles cos everytime ya brake the fluid rushes out past the burnt out seals...

GARTH ROAD MOT CENTRE LTD
Unit 2 1-7 Amenity Way Garth rd Morden Surrey SM4 4AX
Exhausts,Clutches,Diagnostics,Tyres,Servicing and Air Conditioning
Opening soon is our new motorcycle Mot bay
020 83353032
Unit 2 1-7 Amenity Way Garth rd Morden Surrey SM4 4AX
Exhausts,Clutches,Diagnostics,Tyres,Servicing and Air Conditioning
Opening soon is our new motorcycle Mot bay
020 83353032
RE: Brembo on ebay
I think it's safe to say these are only any good for the castings and will need a rebuild. So going by ebay logic will sell for far too much money!!!
Mark
- ChipHazzard
- 4th Gear
- Posts: 994
- Joined: Mon Mar 21, 2005 11:21 am
- Location: SE London / Kent
RE: Brembo on ebay
Why not try these insted
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... %3AIT&rd=1
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... %3AIT&rd=1
FL Noggy S4 Avant
710N's, afterrun mod, MRC Generic Map & RS246 sticker
Kwack ZX7R & DRZ400 supermoto
710N's, afterrun mod, MRC Generic Map & RS246 sticker
Kwack ZX7R & DRZ400 supermoto
Re: RE: Brembo on ebay
That's £2700 more than I can afford at the moment...ChipHazzard wrote:Why not try these insted
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... %3AIT&rd=1
Just had this reply from the seller after asking him if they are new...
"yes there are new i asked them to be powde coated yellow to match my audi s4 and at £200 there a bargin if they were."
My Money is staying firmly in my pocket!
Who is online
Users browsing this forum: No registered users and 59 guests
