Page 1 of 1

How to change rear high level brake lights ?

Posted: Sat Aug 14, 2004 7:47 am
by S4 OXON
what's the best way of getting at the rear high level lights i will do it my self but do not want to rip any trim And can i get the lamps in hallfords and what type are thay before pulling it apart and not getting back together

Posted: Sat Aug 14, 2004 8:27 am
by TarmacTerrorist
Think Tompson has been down this route with the high level brake light, sure he will be around soon.

Posted: Tue Aug 24, 2004 4:10 pm
by 993vic
Found this on the RS4 Forum........

http://www.rs246.com/index.php?name=PNp ... ic&t=46290

Posted: Tue Aug 24, 2004 4:10 pm
by 993vic
Found this on the RS4 Forum........

http://www.rs246.com/index.php?name=PNp ... ic&t=46290

Posted: Thu Sep 02, 2004 9:43 pm
by S4 OXON
what i did was just pull the top part of on each side of the light and two clips pop out not a lot of room but if you use a screw driver bit and grips to undo the one screw which then it sides out did not take long not as bad as it sounds :thumbs: