Milltek CAT's

2.7 V6 30v biturbo - 251bhp
2.7 V6 30v biturbo - 261bhp
Post Reply
User avatar
SimonS4MTM
Top Gear
Posts: 2314
Joined: Thu May 29, 2003 2:40 pm
Location: Norfolk
Contact:

Milltek CAT's

Post by SimonS4MTM » Tue Jul 29, 2003 3:15 pm

Without taking a look under my car, can anyone tell me if the Milltek system with sport CAT's can be fitted without taking the engine out.

Does anyone also know the cost and potential power increase for a chipped car with these fitted.

Sorry, i am being lazy

Thanks
| RS4 - B7 | Phantom Black | Seit 2017 |
| S4 - B5 | Ebony Black | Seit 2002 |

Carps
4th Gear
Posts: 557
Joined: Thu May 01, 2003 11:21 pm
Location: Surrey, England
Contact:

Re: Milltek CAT's

Post by Carps » Tue Jul 29, 2003 5:58 pm

I asked Kim Collins about getting a Miltek system, and was amazed at the price difference between a cat-back, and the full system. When I asked why, he told me it was an engine out job. It seems so many 'simple' things on the S4 are engine out. I guess it would be good to stack up all these jobs and get them done at the same time (ie, cam belt, full exhaust, clutch, etc...) to save money on labour.

Dippy
Cruising
Posts: 2710
Joined: Fri Jan 10, 2003 4:05 pm
Location: West Berks, UK
Contact:

Re: Milltek CAT's

Post by Dippy » Tue Jul 29, 2003 10:04 pm

What's all this BLX??? Please tell me you're only joking about what Kim said. What with another post on AS-net and this, I'm beginning to wonder about Kim.

Fitting a full Miltek system does NOT require engine removal. The reason it costs so much is that it has two cats (which contain platinum) and cats are expensive, particularly performance ones.

Depending on your engine & remap, the full system will give you about 30-40 more bhp AND lbft.
2001 Silver S4 Avant
AmD remap, APR R1 DVs, APR bipipe, Full Miltek exhaust
H&R coilovers, AWE DTS, Porsche front brakes, Short-shifter, 18" RS4 replicas
Defi-HUD boost gauge / turbo-timer (with afterrun pump modification), Phatbox

Carps
4th Gear
Posts: 557
Joined: Thu May 01, 2003 11:21 pm
Location: Surrey, England
Contact:

Re: Milltek CAT's

Post by Carps » Tue Jul 29, 2003 10:18 pm

No joke...
It wasn't Kim himself, but some new chap - Paul maybe.
IIRC, the full Milltek was £2725+vat including MTM chip which on its' own was £850. I can't remember the exact price of the cat-back, but it was around the £800 fitted.

Dippy
Cruising
Posts: 2710
Joined: Fri Jan 10, 2003 4:05 pm
Location: West Berks, UK
Contact:

Re: Milltek CAT's

Post by Dippy » Tue Jul 29, 2003 10:34 pm

From AmD it was around £400 for the cat-back, £1100 for the rest of the system, and they gave me a remap for free (only for special customers like me [img]images/graemlins/grin.gif[/img]).

Of course I had to pay for the original remap 6 months earlier, and that was about £1K.
2001 Silver S4 Avant
AmD remap, APR R1 DVs, APR bipipe, Full Miltek exhaust
H&R coilovers, AWE DTS, Porsche front brakes, Short-shifter, 18" RS4 replicas
Defi-HUD boost gauge / turbo-timer (with afterrun pump modification), Phatbox

Golich
Top Gear
Posts: 1539
Joined: Sat Jan 25, 2003 7:28 pm
Location: Aberdeen

Re: Milltek CAT's

Post by Golich » Thu Jul 31, 2003 10:38 am

As usual Mr. D is correct.

AS Jim at Star Performance explained to me. "I had to break my son's arm in three places to get the CATs on!"

There's an article on Audiworlds Tech section.

Yes, I have my suspicions about Kim. He's far from the cheapest around and I've told him as much on his customer responce form.

Joshie
5th Gear
Posts: 1039
Joined: Mon Jan 06, 2003 5:22 pm

Re: Milltek CAT's

Post by Joshie » Thu Jul 31, 2003 1:34 pm


Yes, I have my suspicions about Kim. He's far from the cheapest around and I've told him as much on his customer responce form.

Tell me the name of an Audi tuner who's "cheap". They're all expensive.

Think if I had my time over agin I'd find a good Audi specialist (there must be one out there) to do the mechanical work and then get the remapping done later by AmD or QST

Golich
Top Gear
Posts: 1539
Joined: Sat Jan 25, 2003 7:28 pm
Location: Aberdeen

Re: Milltek CAT's

Post by Golich » Mon Aug 04, 2003 2:40 pm

I know exactly what you mean. It's interesting that though Jim at Star Performance is approx £35/hr for work on an Audi. He is £25/hr for work on a VW? (I think) Same tools / facilities etc. The labour charges and poor dealer service are reasons I've resorted to getting my hands dirty again for the first time in years.

If for some reason I don't go for the wide one [img]images/graemlins/bowdown.gif[/img] I'm giving serious consideration to tackling the K04 turbo change out my self along with anything else then, possibly taking the car to AMD for the remap. Hmm we shall see....

Post Reply

Return to “S4 (B5 Typ 8D) 1997-2002”

Who is online

Users browsing this forum: No registered users and 93 guests