Anyonne running AMD remap? How good is it?

Post by **AFAP18** » Tue Mar 23, 2004 4:03 pm

Still running stage1 with K04, and thinking about re-maping with AMD.

How good AMD really is? Any comments

Know that the best option is to run with the whole intake, but no budget for it right now.

Audi Freak

Post by **Dippy** » Fri Mar 26, 2004 10:18 pm

I answered your PM first. If you have a stage I map then the ECU thinks you only have K03s. I'm really not sure what the point is of adding K04s if you don't remap. The S4 is a computer-driven car - the program is EVERYTHING.

Post by **Bushy** » Mon Mar 29, 2004 6:19 am

How good AMD really is? Any comments

Brilliant, very professional and do what they say, trust them 100%

Had my car chipped at 12k miles, never looked back. Makes it a totally different car. No problems at all. The only small problems I have had are all non related

Go for it, you wont look back

Post by **AFAP18** » Mon Mar 29, 2004 12:53 pm

I am pretty sure my car is not running properly and know I´ve got two options.

1) Do a custom map with AMD.

2) Or go to Unichip, do a custom injection Map

Tks for the info guys and for the PM.

AudiFreak

Post by **Golich** » Wed Apr 07, 2004 9:03 pm

I had an AMD map in my previous S4. Great guys they really know their stuff. They fixed my car where my local Audi dealership couldn't in 14+ visits over 8 months!!

Post by **AFAP18** » Wed Apr 07, 2004 9:11 pm

I will be having a new ECU calibration with them.

will post impressions afterwards

Audi Freak

Post by **AFAP18** » Mon May 10, 2004 3:29 pm

Well

Guys, I´ve done the Custom Chip for the S4. Let´s consider that I am talking about AMD in usa.
It seems I am the first person to have problems with them. After sending the ECU twice to them, both times that arrived, the car would not start. I had to send the ECU to a Audi bosch specialist, to correct the routes. The car is making and strange noise and variation of the RPM, when cold starting (it´s a shame)
After making it work, the car was really strong, and linear, but the boost was lost after 1 hour of usage. The dvs were blown.

Then I took the car back to the Audi bosch tech guy, to put new TT dvs, and to check if there were any codes.

Checking with the VAG, it has shown two problems, boost too high and poor mixture.
Then I went to test the car, and after 40 minutes, the DVs were blown again.

So I do not know any more what to do? I am worried that the motor will not handle the mixture.

Who should I speak to? Any suggestions?

Audi Freak

Post by **Prawn** » Mon May 10, 2004 3:33 pm

I would give Scott a call at AMD in the UK, he is the best person there
IMO to talk to re tech matters.

Post by **Thorney** » Mon May 10, 2004 8:08 pm

I'll look into this as well for you.

Post by **AFAP18** » Mon May 10, 2004 9:08 pm

All right

Thank you. I will try to talk to them.

Audi Freak

Post by **AFAP18** » Tue May 11, 2004 4:17 pm

Does anyone know the e-mail of Scot from AMD UK

TKS
Freak

Post by **Thorney** » Wed May 12, 2004 7:59 am

Freak, AmD USA are in contact with AmD UK and are looking into it right now. Sorry.

Post by **AFAP18** » Mon May 17, 2004 3:36 pm

Hi Thorney

I still haven´t got a feed-back from them. Do you know of anyone that I should talk to?

Best Regards
Freak

Post by **Prawn** » Mon May 17, 2004 4:17 pm

try this Scott@AmdTechnik.com

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Anyonne running AMD remap? How good is it?

Anyonne running AMD remap? How good is it?

AMD

All right. That´s enough for me.

Unreliable Custom chip

Who is online