Can anyone help me??
I need to get the rear offside caliper replaced as the rubber seal has perished and it is starting to seize up. I've been to a few places today and they have all asked me if i want the 10mm or 12mm fitting? Does anyone know which i should get?? (call me lazy for not measuring it!!)
I drive an X plate 2000 s4 saloon...
Also, anyone know where i can get the part? Live in north london
Brake Caliper...
brake claliper
I would think they are refering to the diametre of the banjo bolt for the flexy hose you'll need to measure it
- Virdee Autos
- Trader (Expired)
- Posts: 2546
- Joined: Sun Jun 05, 2005 6:27 pm
RE: brake claliper
If your a dab hand with things like this, you can buy the seal repair kit from Audi (circa £10-15), and then strip, clean, and rebuild the caliper yourself for much less outlay than a new caliper. This is bearing in mind, that the caliper is serviceable.
Virdee Autos ~ 07950-526592
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
Who is online
Users browsing this forum: No registered users and 44 guests