rust in fuel filler cap ??

2.7 V6 30v biturbo - 251bhp
2.7 V6 30v biturbo - 261bhp
Post Reply
JJmac
Neutral
Posts: 25
Joined: Tue Jan 30, 2007 9:19 pm

rust in fuel filler cap ??

Post by JJmac » Fri Oct 19, 2007 3:03 pm

The steel insert that holds the plastic fuel filler cap is rusted and seems to be getting worse.
im thinking the rust will make it way into the fuel and start clogging fiters etc.

Is this rust a common problem ? and any ideas how to get rid of it?
dont want to paint it unless its the only solution.

cheers.

Siena
2nd Gear
Posts: 200
Joined: Thu Sep 27, 2007 8:56 am
Location: Suffolk
Contact:

RE: rust in fuel filler cap ??

Post by Siena » Fri Oct 19, 2007 11:18 pm

Are you referring to the recess, directly behind the filler flap?

User avatar
shineydave
Cruising
Posts: 2561
Joined: Sun Oct 16, 2005 10:22 am
Location: Bradford, Yorkshire, UK
Contact:

RE: rust in fuel filler cap ??

Post by shineydave » Sat Oct 20, 2007 11:11 am

i think he means the threaded part in the filler neck. as far as clogging filters, that's what they're there for, to prevent this sort of contamination from reaching the injectors so unless it was rusted to the point of falling in bits i wouldn't worry about it. in fact you'd probably risk more contamination by trying to rub it down and paint it
Dave

"if that's the Turbo Fairy knocking tell her i'm not in"

http://www.ukchat.com/home/setnick.asp?room=RS2346

JJmac
Neutral
Posts: 25
Joined: Tue Jan 30, 2007 9:19 pm

RE: rust in fuel filler cap ??

Post by JJmac » Mon Oct 22, 2007 1:26 pm

Yea - it was the threaded section I was referring to. the rust is more of a powder than anything serious - just a bit annoying when i see it on the filler cap every time i fill up.

nobody else has this issue withtheir cars ?

i recon a wipe now and again with an oily rag should keep it clean and dry enough.

cheers.

Post Reply

Return to “S4 (B5 Typ 8D) 1997-2002”

Who is online

Users browsing this forum: No registered users and 37 guests