I keep getting an intermittent clunking and knocking from the suspension I can usually feel it under my feet and it's mostly happening at low speeds going over speed bumps or when the road surface changes at roadworks etc
Is this the DRC starting to fail or could it be suspension arm bushes?
Suspension knocking and clunking
-
boombastik
- 3rd Gear
- Posts: 351
- Joined: Tue Jul 02, 2013 8:32 pm
- Location: Aberdeenshire
Suspension knocking and clunking
RS4 B7 Saloon Milltek Cat back, CAF with piper cross panel, Wrapped optics black, Satin black wheels, TRUPS LED front DRL's & sides, goodridge braided hoses, H&R 10/15mm spares front/rear
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec
My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec
My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Re: Suspension knocking and clunking
Possibly best posting in a model specific area. What model do you have?
It's all torque talk.
-
boombastik
- 3rd Gear
- Posts: 351
- Joined: Tue Jul 02, 2013 8:32 pm
- Location: Aberdeenshire
Re: Suspension knocking and clunking
model is RS4 B7 2007
I had the car in past aberdeen audi to get the spare key coded and asked them to take a look at the suspension the mechanic has informed me that the front right lower curved arm has been replaced with an aftermarket item & itendified that the left side is showing signs of wear
can anyone advise on where i can purchase new arms online ? preferred audi ones
I had the car in past aberdeen audi to get the spare key coded and asked them to take a look at the suspension the mechanic has informed me that the front right lower curved arm has been replaced with an aftermarket item & itendified that the left side is showing signs of wear
can anyone advise on where i can purchase new arms online ? preferred audi ones
RS4 B7 Saloon Milltek Cat back, CAF with piper cross panel, Wrapped optics black, Satin black wheels, TRUPS LED front DRL's & sides, goodridge braided hoses, H&R 10/15mm spares front/rear
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec
My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec
My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Who is online
Users browsing this forum: No registered users and 88 guests