RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Hi all, Just ordered a new set of front n rear mintex pads from car parts on line,, delivered for £80.00 (bargain), any tips on changing them, its good to know what problems you may have before you go bashing with the hammer!!!! ha my mate is a mechanic, but any info would help before i give him the job!also do you really need to buy a fitting kit?? cheers

i have changed my pads about 5-6 times and its simples,just make sure you use the copper grease and you run them in properly,as for the fitting kit ? if nothing is broke or leaking ?

Why are these so cheap? Has anyone tried them?
http://cgi.ebay.co.uk/Audi-RS6-4-2-03-0 ... 5888af55d5

Feck that is cheap if its for a set of pads and disks !!

I would advise on having new fitting kits handy as if the old ones are stuck and you have to mash them to remove you may have a wait to get a fitting kit.

the discs are probably made out of cardboard for that price

My rear discs are due for renewal.
Do I pay Audi £500 or take a chance on these?

These are not proper rs6 rear discs. Its been spotted before.
.

Don't forget peoples, disks and pads make that two tonne beast we drive stop, which is quite important really...cheap options should not really be options. But hey, I'm all for a bargain but not one from the basement.

Hmmm, I can't see how they could make them for that price.
Not expensive enough to instill confidence.
There is a psychology lesson in there. If they were £250 we'd think they were better...
I'm not brave enough to try them though, even if they were free.

i havent said the price includes discs,,,??its £80.00 for mintex pads, front n back guys,, dont know where the notion discs were included??

Sorry we've completely ignored your original post and I, like others was fascinated by the ebay ad posted by zip929 for "Audi RS6 4.2 03/02- Brake Discs & Pads Rear" for the grand sum of £41.42

Even if they were made out of cheese they'd be more expensive.


Anyway, getting back to your question
The fronts are straightforward. The rears will probably need a caliper rewind tool (available from your local halfords). Don't press the brake when the pads are out, or you could damage the calipers.
Remember to keep an eye on the fluid level and remove some if necessary.

Says discs are solid not vented, thought the RS6 had ventilated rear discs.

Part Number -DISC1029

Fitment Details -

Audi RS6 4.2 03/02 > Pair of Rear Solid Disc (245mm - 5 stud) and Brake Pads

Pads changed, no problem, much easier than I thought, everyone should do it themselves, anyway, pads are the real thing, minted, so happy days!!!