Page 1 of 1
Aero Wipers
Posted: Thu May 27, 2010 2:35 pm
by jd_hants
Anyone know what thew audi part numbers are for the wiper arms to fit the new style aero wiper blades??? I have the blades already.
RE: Aero Wipers
Posted: Thu May 27, 2010 2:42 pm
by Shoppinit
Shoppinit wrote:Driver's side arm: 4B2 955 408C
Passenger side arm: 4B2 955 407C
Wipers: 4B2 955 425C (x2)
http://www.rs246.com/index.php?name=PNp ... d&start=15
RE: Aero Wipers
Posted: Thu May 27, 2010 2:47 pm
by jd_hants
OK. Many thanks! Do the old ones come off quite easily or do i need some kind of puller?
RE: Aero Wipers
Posted: Thu May 27, 2010 2:59 pm
by Shoppinit
Dunno, never tried
RE: Aero Wipers
Posted: Thu May 27, 2010 3:04 pm
by jd_hants
soon find out.....!!
RE: Aero Wipers
Posted: Thu May 27, 2010 3:05 pm
by Shoppinit
Keep us posted
RE: Aero Wipers
Posted: Thu May 27, 2010 3:23 pm
by SteveCuz
The Arms? No problem just a wiggle.
Steve
RE: Aero Wipers
Posted: Thu May 27, 2010 5:21 pm
by p3u
Just curious, did any C5 RS6 come with the aero wipers? Mine has them, but then again I'm a second owner.
RE: Aero Wipers
Posted: Thu May 27, 2010 5:22 pm
by Shoppinit
Not in Europe, and I'm pretty sure not in the USA. I think they went with the classic design because the Aero ones aren't as good above 150mph
RE: Aero Wipers
Posted: Thu May 27, 2010 6:49 pm
by darrenswift
The arms come off really easily. Just undoe the nut and give the old arms a bit of a twist/wiggle. It took me a couple of attempts to get the new arms fitted perfectly, as I was worried they might catch. All in all though, a worthwhile investment in my book
RE: Aero Wipers
Posted: Thu May 27, 2010 8:41 pm
by Shoppinit
Grizz sells the kits, too.
RE: Aero Wipers
Posted: Fri May 28, 2010 3:10 pm
by el_ringo
Make sure the arms are bolted on nice and tight. I had blades going all over the bloody place!!
RE: Aero Wipers
Posted: Wed Jun 09, 2010 8:56 am
by jd_hants
OK got the arms and fitted. Have I got them the right way round or doing something stupid as the drivers blade doesnt cover the entire screen like the previous one did. It needs to go another 2.5"??? Is everyones like this who has replaced them. Presumably the part numbers quoted are for the Saloon as well as the Avant????