Powdercoating

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
Post Reply
Mɐʇʇ
Cruising
Posts: 2725
Joined: Tue Oct 07, 2014 8:30 pm

Powdercoating

Post by Mɐʇʇ » Mon Oct 17, 2022 9:16 am

Can anyone recommend a powdercoaters or 2-pack finishers not too far from Farnborough, Hants. The old place I used to use in southampton are not interested in taking on individual jobs any more, so need to find a new lot.
"not a professional engineer, mechanic and mechanist"

ChrisA
4th Gear
Posts: 809
Joined: Thu May 07, 2020 11:28 am
Location: Langstone, nr. Portsmouth

Re: Powdercoating

Post by ChrisA » Fri Oct 21, 2022 6:49 pm

Mɐʇʇ wrote:
Mon Oct 17, 2022 9:16 am
Can anyone recommend a powdercoaters or 2-pack finishers not too far from Farnborough, Hants. The old place I used to use in southampton are not interested in taking on individual jobs any more, so need to find a new lot.
I use RalTech near Cosham and I’ve had no complaints. I’ll be putting a load of parts in over the next few weeks Matt if you want to tag them onto my order. 👍

https://www.raltechfinishers.co.uk/

User avatar
Jayjay101
4th Gear
Posts: 898
Joined: Fri Dec 18, 2015 9:24 pm

Re: Powdercoating

Post by Jayjay101 » Fri Oct 21, 2022 9:02 pm

ChrisA wrote:
Mɐʇʇ wrote:
Mon Oct 17, 2022 9:16 am
Can anyone recommend a powdercoaters or 2-pack finishers not too far from Farnborough, Hants. The old place I used to use in southampton are not interested in taking on individual jobs any more, so need to find a new lot.
I use RalTech near Cosham and I’ve had no complaints. I’ll be putting a load of parts in over the next few weeks Matt if you want to tag them onto my order. Image

https://www.raltechfinishers.co.uk/
I 2nd this I’ve know Trev the owner a long time always does a good job


Sent from my iPhone using Tapatalk
c5 rs6 owner thats been known to cut the wrong wire.............

Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: No registered users and 92 guests