RS6C5 19"x9" OE RONAL 5 SPOKE ALLOY WHEEL REQ ASAP

[RS6C5AVANT81]

Good Afternoon All,
I need to get hold of a second hand RS6 C5 19"x9" OE 5 SPOKE RONAL ALLOY WHEEL URGENTLY.
I already have 3 wheels- I just need a forth one.
I'm not concerned about the condition of it (as it will be powder coated straight away) as long as its not buckled or cracked. Also a new tyre will be going on it to - so if tyre is bald that is fine!
I'm based West London, UK and can pick up if not too far away.
Pls can someone help?
Thanks
James

[steve2003rs6]

I might be in a position to help. Not sure if they are 9 or 8.5. They were the original wheels off my c5.
My new set are 9,s
Will check sizes when I get home. If the sizes are right I will send a photo.
Before I removed them. They were checked and powder coated. I am on the east coast.
I use one as my spare
Two are available in good condition
One had a small split and was repaired.

[RS6C5AVANT81]

Brill thanks for info. Look forward to hearing from you.
Cheers again
James

[steve2003rs6]

Just remembered. The reason I removed them from my car.
The fronts were fitted with 5mm spacers when I bought the car.
IIRC without the spacers the front wheels would foul on the calipers.
I personally hated the spacers. So by chance a set of Audi wheels came up for sale at a very reasonable price.
Job done and no spacers.
I will get the wheel size and et size for you so you can compare with your existing alloys.

[RS6C5AVANT81]

Any luck ?

[steve2003rs6]

Hi James. Sorry mate my originals are 19x8 et35.
As previously stated my new ones are 19x9.

[RS6C5AVANT81]

Ah ok no probs- thanks for checking !