Gearbox oil pipe fitting identification
-
- 2nd Gear
- Posts: 152
- Joined: Tue Sep 03, 2013 11:02 am
- Location: Kirkcaldy, Fife
Gearbox oil pipe fitting identification
I am looking for some help to identify the fitting that Audi use on the gearbox oil cooling system. I have 18x1.5mm one end and this on the other end so I need an adaptor to join the two, anybody got any ideas what type of fitting this is and where I might get a 18x1.5mm OG60 male to Audi fitting? This is the pipe that goes into the main radiator.
Re: Gearbox oil pipe fitting identification
I've looked before and found nothing interesting. I think if it came to it, I'd be using the audi end and then brazing a standard union on to the pipe to create an adaptor.
Either DIY it, or the pirtek guys can do a nice job to braze together bits to create custom adaptors.
Either DIY it, or the pirtek guys can do a nice job to braze together bits to create custom adaptors.
"not a professional engineer, mechanic and mechanist"
-
- 2nd Gear
- Posts: 152
- Joined: Tue Sep 03, 2013 11:02 am
- Location: Kirkcaldy, Fife
Re: Gearbox oil pipe fitting identification
Hi Matt, Yeh, I spoke to Pirtek who made the hoses for the cooler, and they can make a new fitting to suit what I have. This has been one nightmare of a job just trying to source alternative parts
Who is online
Users browsing this forum: javier_gl, Marcin, steve2003rs6 and 166 guests