Hi,
I'm looking for some help sourcing good quality CV joints for the front of my car. Is there any make to look for? Anyone in the UK I should get them from?
All advice gratefully received.
Gus
Front CV Joints
Re: Front CV Joints
No one helping?
Re: Front CV Joints
Just get them from TPS or Audi. If not, then a reputable brand at ECP or autodoc. Failing that, Rockauto. There's nothing special about the CV joints. They are the same on all the A6 V8s IIRC.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Re: Front CV Joints
eg:
https://www.autodoc.co.uk/car-parts/oem/4b3407271g
https://www.eurocarparts.com/p/gkn-lobr ... -657443140
https://www.eurocarparts.com/p/gkn-lobr ... -654448760
https://www.autodoc.co.uk/car-parts/oem/4b3407271g
https://www.eurocarparts.com/p/gkn-lobr ... -657443140
https://www.eurocarparts.com/p/gkn-lobr ... -654448760
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Re: Front CV Joints
I replaced one of mine with the GKN one Ben linked to above from ECP. Quality was good and it came in just over 80 quid.
"not a professional engineer, mechanic and mechanist"
Who is online
Users browsing this forum: No registered users and 130 guests