Bufkin pipes.
-
- Top Gear
- Posts: 2433
- Joined: Mon Aug 19, 2019 7:43 pm
Bufkin pipes.
Just got to collect the viton o rings.
1 for me that’s 11 for those who are still interested please add your name.
Last edited by steve2003rs6 on Thu Jun 03, 2021 5:47 pm, edited 1 time in total.
Re: Bufkin pipes.
I'll have one if they're going. Hopefully that will guarantee I will never need it!
-
- Top Gear
- Posts: 2433
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Bufkin pipes.
Ordered 50 o rings in viton as there are 4 o rings for each bufkin pipe.
They should arrive next week.
15 mm Id x2mm section. Gives a od of 19.5 to 19.6 when installed on the bufkin pipe.
They should arrive next week.
15 mm Id x2mm section. Gives a od of 19.5 to 19.6 when installed on the bufkin pipe.
Last edited by steve2003rs6 on Thu Jun 03, 2021 5:53 pm, edited 1 time in total.
Re: Bufkin pipes.
I'll take one also please. Just in case.....
Re: Bufkin pipes.
still want one
Re: Bufkin pipes.
I'll take one too please, as above - just in case......
Thanks,
John
Thanks,
John
-
- Top Gear
- Posts: 2433
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Bufkin pipes.
The following are reserved in addition to the above confirmed
Will
ChrisA
Shoppinit
Captric
Human joist
Norwich photo
Gregstv
First 12 now accounted for.
I have already ordered another 12.
Will
ChrisA
Shoppinit
Captric
Human joist
Norwich photo
Gregstv
First 12 now accounted for.
I have already ordered another 12.
Last edited by steve2003rs6 on Fri Jun 04, 2021 12:18 pm, edited 1 time in total.
Re: Bufkin pipes.
Awesome. Count me in.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
-
- Top Gear
- Posts: 2433
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Bufkin pipes.
Is there anyone in a position to do a trial fit of one of the pipes.
Although the sizes are exactly the same as the original bufkin pipe. And these fittings have a proven track record.
As usual I am being over cautious and would like confirmation that all is ok before we ship them all out.
Although the sizes are exactly the same as the original bufkin pipe. And these fittings have a proven track record.
As usual I am being over cautious and would like confirmation that all is ok before we ship them all out.
Re: Bufkin pipes.
I can if no one closer can check. I have an engine on an engine stand. I am in Australia.
-
- Top Gear
- Posts: 2433
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Bufkin pipes.
Gregstv many thanks for the offer. Wish you were a lot closer.
A massive big thank you to IchBautAuto. Who provided the detailed drawing and dimensions of the original bufkin pipe. Also for all the information on the o ring sizes.
Couldn’t have done this without your co operation and advice.
A massive big thank you to IchBautAuto. Who provided the detailed drawing and dimensions of the original bufkin pipe. Also for all the information on the o ring sizes.
Couldn’t have done this without your co operation and advice.
Last edited by steve2003rs6 on Fri Jun 04, 2021 1:57 pm, edited 1 time in total.
-
- Top Gear
- Posts: 2433
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Bufkin pipes.
Hopefully posting the pipes out end of next week.
Please pm me your addresses so that I can forward on.
Cost is around £15:00 May be a bit cheaper depends on cost of viton o rings.
Then Jiffy bag and postage on top.
Will get the total price sorted next week
Still cheaper than the one I got from Poland. And these are to the original spec.
Cheers Steve.
Please pm me your addresses so that I can forward on.
Cost is around £15:00 May be a bit cheaper depends on cost of viton o rings.
Then Jiffy bag and postage on top.
Will get the total price sorted next week
Still cheaper than the one I got from Poland. And these are to the original spec.
Cheers Steve.
Re: Bufkin pipes.
Cool. You set up for Paypal?
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
-
- Top Gear
- Posts: 2433
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Bufkin pipes.
Yes shopp. PayPal is good. Though I have never used it yet for money coming in. It’s always for money going out !
Ps. It’s been great to be able to contribute something back to the forum.
Ps. It’s been great to be able to contribute something back to the forum.
Re: Bufkin pipes.
Pm sent as requested, and thanks for organizing same - much appreciated
Who is online
Users browsing this forum: EireRS6, javier_gl, Marcin, srichards, steve2003rs6 and 198 guests