Page 1 of 2

Wheel spacer pics

Posted: Tue Oct 08, 2019 6:11 am
by Foxmeister
Does anybody have any pics of their car with 10mm spacers to see how it sits? Some angles would be good

Also, what spacers are best to use and where from?

Re: Wheel spacer pics

Posted: Wed Oct 09, 2019 5:33 am
by Foxmeister
Nobody??? Anybody???

Please, dont make me beg...

Re: Wheel spacer pics

Posted: Wed Oct 09, 2019 11:01 am
by Shoppinit
Beg, biatch.

Re: Wheel spacer pics

Posted: Wed Oct 09, 2019 1:06 pm
by chunky79
You could use the search function, there have been loads of pics put up on the C5 forum. Hopefully not all of them have been done over by photofucket

Re: Wheel spacer pics

Posted: Wed Oct 09, 2019 4:09 pm
by Mark-RS
10mm H and R hubcentric.

I'll try and get a few pics......

Re: Wheel spacer pics

Posted: Wed Oct 09, 2019 4:30 pm
by Mark-RS
A few that I was able to pull quickly.

20190427_174427.jpg
20190429_173037.jpg
20190429_173053.jpg
20190429_173121.jpg
20190930_150053.jpg
20190930_150126.jpg
20191001_153157.jpg
20191001_153743.jpg
20191001_153816.jpg
20191001_155011.jpg

Re: Wheel spacer pics

Posted: Thu Oct 10, 2019 3:33 am
by Foxmeister
Shoppinit wrote:
Wed Oct 09, 2019 11:01 am
Beg, biatch.
Ok Mr Shopp... do i have to gargle also? :shock:

Re: Wheel spacer pics

Posted: Thu Oct 10, 2019 3:39 am
by Foxmeister
chunky79 wrote:
Wed Oct 09, 2019 1:06 pm
You could use the search function, there have been loads of pics put up on the C5 forum. Hopefully not all of them have been done over by photofucket
Chunky, pretty much any forum search function is a load of pish so i never bothered with it, tried Pinterest, Google etc but theres a severe lack of decent C5 pics with info, we're being over run with these C7 beasts it seems, but i'll have a look :bigblink:

Re: Wheel spacer pics

Posted: Thu Oct 10, 2019 3:53 am
by Foxmeister
Mark-RS wrote:
Wed Oct 09, 2019 4:09 pm
10mm H and R hubcentric.

I'll try and get a few pics......
Well played sir :thumb: that looks great, and quite low, what suspension you got? Does it rub at all with the spacers?

From what i gather, 10mm is the max for the C5 but it looks like it could maybe do a bit more, wonder if 12mm would fit ok

Re: Wheel spacer pics

Posted: Thu Oct 10, 2019 11:19 am
by chunky79
The search function on here had always been pretty good imo.
Think you may get some rubbing with 12mm, and possibly be outside the arches. Also got to be careful with wheel bolt length.

Re: Wheel spacer pics

Posted: Thu Oct 10, 2019 12:41 pm
by Foxmeister
chunky79 wrote:
Thu Oct 10, 2019 11:19 am
The search function on here had always been pretty good imo.
Think you may get some rubbing with 12mm, and possibly be outside the arches. Also got to be careful with wheel bolt length.
Ok, i'll stick with the 10mm likely as they look fine and will just be a second set of wheels as i will be fitting the 20's soon

I did see something about the bolts, do you get replacement bolts with the spacers, no?

Re: Wheel spacer pics

Posted: Thu Oct 10, 2019 1:08 pm
by chunky79
Not sure mate, I don't run spacers. Folk used to get them from Virdee, not sure of he still sells them.

Re: Wheel spacer pics

Posted: Thu Oct 10, 2019 3:48 pm
by Mark-RS
H&R you get the bolts with them so no worries about that.

99% of the time I don't get rubbing. I do however get occasional rubs when hitting a dip in the road at speed but it appears to be more the lower edge of the wheel by the back door/sill area rather than the upper arch. Might be something to do with my camber set up.

I run KW V3 on mine, but have no idea of the settings. It was all done when I bought the car and I can see nothing in the paperwork with regard to settings other than... "Fitted"

Re: Wheel spacer pics

Posted: Fri Oct 11, 2019 3:17 am
by Foxmeister
chunky79 wrote:
Thu Oct 10, 2019 1:08 pm
Not sure mate, I don't run spacers. Folk used to get them from Virdee, not sure of he still sells them.
Cheers Chunk, i'll see what he says :thumbs:
Mark-RS wrote:
Thu Oct 10, 2019 3:48 pm
H&R you get the bolts with them so no worries about that.

99% of the time I don't get rubbing. I do however get occasional rubs when hitting a dip in the road at speed but it appears to be more the lower edge of the wheel by the back door/sill area rather than the upper arch. Might be something to do with my camber set up.

I run KW V3 on mine, but have no idea of the settings. It was all done when I bought the car and I can see nothing in the paperwork with regard to settings other than... "Fitted"
Nice one Mark, i had been looking at Eibach but i'll have a look at the H&R also

It looks good sitting low, just not sure if i can get away with it myself :thumb:

Re: Wheel spacer pics

Posted: Thu Oct 17, 2019 5:57 pm
by V!per
Here is mine on Bilsteins and 10mm H&R spacers (if the upload works) ImageImageImageImage

Sent from my VOG-L29 using Tapatalk