replacement headlight/bumper trim

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
Post Reply
Billy_G
1st Gear
Posts: 88
Joined: Thu Aug 28, 2014 9:36 pm

replacement headlight/bumper trim

Post by Billy_G » Sat Dec 01, 2018 4:28 pm

anyone got a pair of these or just the drivers side they want rid off? All i can find are crappy chrome ones and I'm not sold that standard a6 ones will fit
Attachments
s-l1600.jpg
Daily beater, Daytona Avant, MTM stage 1 & box map, wagners, bilsteins, hotchkis arb, milteks, Girodisc stoppers etc

User avatar
Shoppinit
Cruising
Posts: 19832
Joined: Wed Dec 31, 2008 6:24 pm

Re: replacement headlight/bumper trim

Post by Shoppinit » Sat Dec 01, 2018 6:11 pm

Why don't you just plastidip them? Or did you want the aluminium ones?
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."

Billy_G
1st Gear
Posts: 88
Joined: Thu Aug 28, 2014 9:36 pm

Re: replacement headlight/bumper trim

Post by Billy_G » Sun Dec 02, 2018 11:47 am

I could do I guess, I was thinking of getting some of the trim wrapped in black anyway. Ive bit the bullet and gone for some ebay a6 ones that claim to fit a rs now so hopefully a dip or a wrap will leave them looking oem ish
Daily beater, Daytona Avant, MTM stage 1 & box map, wagners, bilsteins, hotchkis arb, milteks, Girodisc stoppers etc

User avatar
Shoppinit
Cruising
Posts: 19832
Joined: Wed Dec 31, 2008 6:24 pm

Re: replacement headlight/bumper trim

Post by Shoppinit » Sun Dec 02, 2018 11:59 am

Should be ok if they are for a V8 A6.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."

User avatar
mavada
Cruising
Posts: 3270
Joined: Thu Nov 11, 2010 1:19 pm
Location: The Neanderthal land

Re: replacement headlight/bumper trim

Post by mavada » Sun Dec 02, 2018 12:27 pm

If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g

Billy_G
1st Gear
Posts: 88
Joined: Thu Aug 28, 2014 9:36 pm

Re: replacement headlight/bumper trim

Post by Billy_G » Sun Dec 02, 2018 1:56 pm

Same ones I've ordered :beerchug:
Daily beater, Daytona Avant, MTM stage 1 & box map, wagners, bilsteins, hotchkis arb, milteks, Girodisc stoppers etc

User avatar
mavada
Cruising
Posts: 3270
Joined: Thu Nov 11, 2010 1:19 pm
Location: The Neanderthal land

Re: replacement headlight/bumper trim

Post by mavada » Sun Dec 02, 2018 3:36 pm

:thumbs:
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g

Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: EireRS6, javier_gl, Marcin, srichards, steve2003rs6 and 175 guests