Anyone know how much wear is allowed?
Sent fra min SM-N910F via Tapatalk
Rear disk minimum thickness
-
- 1st Gear
- Posts: 99
- Joined: Sun Oct 18, 2015 7:44 pm
Rear disk minimum thickness
2003 RS6 Avant, Daytona grey
2012 Toyota GT86
2014 Toyota Prius Plus 7
2012 Toyota GT86
2014 Toyota Prius Plus 7
Re: Rear disk minimum thickness
It's stamped on the disk bell. 20mm IIRC.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
- jockthedog
- 2nd Gear
- Posts: 150
- Joined: Sat Apr 18, 2015 11:39 pm
Re: Rear disk minimum thickness
You are in serious danger of sounding like a Scot! Or perhaps even a Geordie! Good work.atledreier wrote:Anyone know how much wear is allowed?
Sent fra min SM-N910F via Tapatalk
Too much wear is not allowed. Otherwise, Feck it.


-
- 1st Gear
- Posts: 99
- Joined: Sun Oct 18, 2015 7:44 pm
Re: Rear disk minimum thickness
Nice, that means I've got plenty life left in them. Going to have them on a lathe since they are a bit rusted on the edge.
Sent fra min SM-N910F via Tapatalk
Sent fra min SM-N910F via Tapatalk
2003 RS6 Avant, Daytona grey
2012 Toyota GT86
2014 Toyota Prius Plus 7
2012 Toyota GT86
2014 Toyota Prius Plus 7
Re: Rear disk minimum thickness
probably last you another 5 years. They don't really do much tbhatledreier wrote:Nice, that means I've got plenty life left in them. Going to have them on a lathe since they are a bit rusted on the edge.
Sent fra min SM-N910F via Tapatalk
Who is online
Users browsing this forum: No registered users and 56 guests