Page 1 of 1
KWE Automotive
Posted: Sat Apr 11, 2015 8:09 pm
by Billy_G
Has anyone ever had anything of these chaps before ?
http://www.kwe-racing.de/Audi/Audi-S6/R ... ::781.html
seem to be doing some fairly nice kit at reasonable cost but I've heard a rumor some things on the internet might be lies
Re: KWE Automotive
Posted: Sat Apr 11, 2015 9:55 pm
by Gripper1
Seems promising, proper mandrel bends and tidy welding. Also the exchange rate works well for us.
The literal/part translation is brilliant.
As is the case for most things, someone has to take the plunge and be the guinea pig. I guess if it's bought via credit card there is no real risk.
Re: KWE Automotive
Posted: Sun Apr 12, 2015 2:22 pm
by PoP-PoP-BANG
Ive got kwe intercoolers fitted and they're much improved over the oem ones, similar quality to wagners but are bigger. Had no problems either.
https://youtu.be/iDemaR7f5eI
Re: KWE Automotive
Posted: Sun Apr 12, 2015 5:16 pm
by Billy_G
Nice little video that, the downpipes look good quality so i might bare these in mind. I cant bring myself to spend the money on miltek units and I just cant help but not trust the cheap ebay ones that have started popping up!
Re: KWE Automotive
Posted: Mon Apr 13, 2015 10:54 am
by bam_bam
Proper 3" too! Do it BillyGoat, in theory it should see better gains than those running the Miltek race 2.75" downpipes (if you bone up for the CATless KWEs).
Re: KWE Automotive
Posted: Mon Apr 13, 2015 1:45 pm
by sweegie
bam_bam wrote:Proper 3" too! Do it BillyGoat, in theory it should see better gains than those running the Miltek race 2.75" downpipes (if you bone up for the CATless KWEs).
5.5" just doesn't cut it in the DP world....
Re: KWE Automotive
Posted: Mon Apr 13, 2015 2:27 pm
by SchrickRS6
Call me a knob but.....I thought there were issues with fitting 3" x 2 DP's on this car? ie no room for anything over 2,75" x 2.....
Re: KWE Automotive
Posted: Mon Apr 13, 2015 7:54 pm
by PoP-PoP-BANG
I bought my intercoolers through this seller on ebay and he's open to negotiation
http://pages.ebay.com/link/?nav=item.vi ... 42&alt=web
I was going to go for the DPs too but needed an exhaust quick time to finish my turbo swap so i went for full miltek decat. With the ICs on top he was offering a good discount.