Anyway phone Audi they wanted £1100 just for the rack so phoned a rack recon place I use they said £180 as long as the internal shaft wasn't shot,so next thought I'd do some research on taking it out ,I was all of a sudden not so happy reading that u have to remove the engine to change it anyway that wasn't going to happen as so busy don't have the room in my workshop so tackled the job from the drivers side wheel arch after making a tool to get to the $1000 bolt it was out in about an hour and a half just to realise the shaft was shot so back to finding a new or recon rack after much searching and comparing I managed to find one for £230 I won't say we're from as don't want to upset the traders on here once I got it it took about an hour to refit and hay presto she is back on the road just shows that big jobs aren't always that big lol
Steering rack
Steering rack
Well couple of weeks ago I had steering pump whine then all of a sudden no steering limped it to my workshop and looked through the wheel and power steering fluid was poring out of the rack garters
Anyway phone Audi they wanted £1100 just for the rack so phoned a rack recon place I use they said £180 as long as the internal shaft wasn't shot,so next thought I'd do some research on taking it out ,I was all of a sudden not so happy reading that u have to remove the engine to change it anyway that wasn't going to happen as so busy don't have the room in my workshop so tackled the job from the drivers side wheel arch after making a tool to get to the $1000 bolt it was out in about an hour and a half just to realise the shaft was shot so back to finding a new or recon rack after much searching and comparing I managed to find one for £230 I won't say we're from as don't want to upset the traders on here once I got it it took about an hour to refit and hay presto she is back on the road just shows that big jobs aren't always that big lol
Anyway phone Audi they wanted £1100 just for the rack so phoned a rack recon place I use they said £180 as long as the internal shaft wasn't shot,so next thought I'd do some research on taking it out ,I was all of a sudden not so happy reading that u have to remove the engine to change it anyway that wasn't going to happen as so busy don't have the room in my workshop so tackled the job from the drivers side wheel arch after making a tool to get to the $1000 bolt it was out in about an hour and a half just to realise the shaft was shot so back to finding a new or recon rack after much searching and comparing I managed to find one for £230 I won't say we're from as don't want to upset the traders on here once I got it it took about an hour to refit and hay presto she is back on the road just shows that big jobs aren't always that big lol
-
jamesthecat
- 3rd Gear
- Posts: 356
- Joined: Tue Sep 02, 2008 12:37 am
- Location: Finding out were people live,.Ask dvla its easy if you own private land.
Re: Steering rack
Come on spill the beans,any pictures of the tool you made?And why would you upset the traders?I thought these places are to help each other out with problems with the cars 
cars,mk1 1.3 escort,mk 3 1.6 cortina,mk 1 granada 3.0s,1.7 morris marina,hillman imp,mini with worsley engine,
mk 4 2.0 cortina,mk 1 xr2, mk2 xr2, 2.0glsi sierra,mk 3 jag,subrau turbo x3,golf mk 1 gti,skoda octavia elagance,
evo 6,evo 8,rover 1.4tc,golf gttdi,toyota surf 2.4,toyota surf 3.0 skoda superb elagance x2,
rs6 x4.land cruiser amazon 4.2td, mr2.
Bikes,FS1E,honda cb 650,yam thunder cat,r6,gix 600 x 3 gix 1000 x2 kwak zx12 x2
mk 4 2.0 cortina,mk 1 xr2, mk2 xr2, 2.0glsi sierra,mk 3 jag,subrau turbo x3,golf mk 1 gti,skoda octavia elagance,
evo 6,evo 8,rover 1.4tc,golf gttdi,toyota surf 2.4,toyota surf 3.0 skoda superb elagance x2,
rs6 x4.land cruiser amazon 4.2td, mr2.
Bikes,FS1E,honda cb 650,yam thunder cat,r6,gix 600 x 3 gix 1000 x2 kwak zx12 x2
Re: Steering rack
Hi mate I will take a pic of the tool we made to be honest the tool is nothing special the bottom bolt is still abit fiddley but a 100 times easier than taking the engine out lol
-
jamesthecat
- 3rd Gear
- Posts: 356
- Joined: Tue Sep 02, 2008 12:37 am
- Location: Finding out were people live,.Ask dvla its easy if you own private land.
Re: Steering rack
Or paying audi £1100 
cars,mk1 1.3 escort,mk 3 1.6 cortina,mk 1 granada 3.0s,1.7 morris marina,hillman imp,mini with worsley engine,
mk 4 2.0 cortina,mk 1 xr2, mk2 xr2, 2.0glsi sierra,mk 3 jag,subrau turbo x3,golf mk 1 gti,skoda octavia elagance,
evo 6,evo 8,rover 1.4tc,golf gttdi,toyota surf 2.4,toyota surf 3.0 skoda superb elagance x2,
rs6 x4.land cruiser amazon 4.2td, mr2.
Bikes,FS1E,honda cb 650,yam thunder cat,r6,gix 600 x 3 gix 1000 x2 kwak zx12 x2
mk 4 2.0 cortina,mk 1 xr2, mk2 xr2, 2.0glsi sierra,mk 3 jag,subrau turbo x3,golf mk 1 gti,skoda octavia elagance,
evo 6,evo 8,rover 1.4tc,golf gttdi,toyota surf 2.4,toyota surf 3.0 skoda superb elagance x2,
rs6 x4.land cruiser amazon 4.2td, mr2.
Bikes,FS1E,honda cb 650,yam thunder cat,r6,gix 600 x 3 gix 1000 x2 kwak zx12 x2
Re: Steering rack
If u need info mate pm me
Re: Steering rack
Tell footlong, he won't mind upsetting the traders. And I won't cry for them too much either.wrcpulsar wrote:I won't say we're from as don't want to upset the traders on here
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
- Mr Footlong
- Cruising
- Posts: 4331
- Joined: Thu Nov 10, 2011 12:07 pm
Re: Steering rack
You know me too well. Sounds like a techncal article/doc to add to the repository. 
Current:
23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung
Gone:
"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung
Gone:
"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Re: Steering rack
Just wish i had took pics of the hole job now 
- Mr Footlong
- Cruising
- Posts: 4331
- Joined: Thu Nov 10, 2011 12:07 pm
Re: Steering rack
is that similar to a rim job? The interweb is full of those.
Current:
23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung
Gone:
"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung
Gone:
"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Re: Steering rack
yes do tell
save us the big bills and engine out hassle!
save us the big bills and engine out hassle!
KV53 YML - RS6 Avant - Stolen Hampshire
RS 51X CS - RS6 Avant - Sold
RS 51X CS - RS6 Avant - Sold
Re: Steering rack
OP has gone very quiet! I am somewhat skeptical that he managed to remove the rack in under two hours to be honest... I know MRC do it this way, but even then it takes them 5 hours to remove, and that's with a proper ramp and all the right tools.
Would love to be proven wrong though!
Mart.
Would love to be proven wrong though!
Mart.
C6 RS6 Plus with a few sensible mods...
Who is online
Users browsing this forum: No registered users and 216 guests