Rear parking sensors are a bumper off job as the impact bar gets in the way (IIRC). Obviously you need to paint the new sensors before fitting (simple enough with the correct spray paints), and a diagnostic scan identifies which sensors have failed (or are failing).
I always found getting the air box off was the most difficult part of getting to the hoses, N75 etc... no sorry I meant putting it back afterwards. Short MAF sensor wires and those stupid front hoses with no flexibility.
Cam-Belt Change
Re: Cam-Belt Change
You coming back into the fold, Mr Gardiner?
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Re: Cam-Belt Change
the name sounds familiar, think from audisrs...
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Re: Cam-Belt Change
I've always been around (lurking) muhahahaha but no, I've come back due to some people asking me questions here about my old RS6 which is up for sale again (here and on eBay). :p
Still have Audi bits to sell as well.. but can't quite give up my HEX-COM USB or Bentley DVD manuals yet, just in case.
P.s. Sorry for the OT waffle.
Still have Audi bits to sell as well.. but can't quite give up my HEX-COM USB or Bentley DVD manuals yet, just in case.
P.s. Sorry for the OT waffle.
Re: Cam-Belt Change
Thought you would have included them with your Bentley hard copy manualGardinerG wrote:I've always been around (lurking) muhahahaha but no, I've come back due to some people asking me questions here about my old RS6 which is up for sale again (here and on eBay). :p
Still have Audi bits to sell as well.. but can't quite give up my HEX-COM USB or Bentley DVD manuals yet, just in case.
P.s. Sorry for the OT waffle.
. I still haven't got to the back cover yet !Re: Cam-Belt Change
LOL, nice try though. TBH I know you can transfer them from PCs by unregistering (I had to build an XP virtual PC to get the RS6 eBahn reader to work), but I am not sure if you are able/licensed to sell them on.ahoooga wrote:Thought you would have included them with your Bentley hard copy manualGardinerG wrote:I've always been around (lurking) muhahahaha but no, I've come back due to some people asking me questions here about my old RS6 which is up for sale again (here and on eBay). :p
Still have Audi bits to sell as well.. but can't quite give up my HEX-COM USB or Bentley DVD manuals yet, just in case.
P.s. Sorry for the OT waffle.
G
Re: Cam-Belt Change
Thanks for the replies all.
I think I might contemplate replacing the sensors myself. Audi told me which ones they had tested and were not working correctly.
No idea how to get the rear bumper off but assume there are some fixings hidden in the rear wheel-arch somewhere?
Guess I need to take the wheels, arch-liner etc off to have a look.
Not sure about the ARB bushes myself. Might leave this for a while and then think about getting the professionals to do this for me.
Not sure my £25 tool-kit which I bought from Argos is up to the job of sorting these!!!!
I think I might contemplate replacing the sensors myself. Audi told me which ones they had tested and were not working correctly.
No idea how to get the rear bumper off but assume there are some fixings hidden in the rear wheel-arch somewhere?
Guess I need to take the wheels, arch-liner etc off to have a look.
Not sure about the ARB bushes myself. Might leave this for a while and then think about getting the professionals to do this for me.
Not sure my £25 tool-kit which I bought from Argos is up to the job of sorting these!!!!
*SOLD* - currently looking for a replacement
03 Missano Red Avant
Silver Leather, H&Rs, Dension iPod Connection kit
85k miles
03 Missano Red Avant
Silver Leather, H&Rs, Dension iPod Connection kit
85k miles
Re: Cam-Belt Change
Do a google for bumper removal mate, used it when i removed mine. There are a couple of hidden tinkers!!!
previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.
Now - Empty garage
If you don't know where you're going, any road will take you there!
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.
Now - Empty garage
If you don't know where you're going, any road will take you there!
Who is online
Users browsing this forum: No registered users and 118 guests