Cheers guys.... ive seen the ebay ones and the called C spanner but im not sure if these are the right ones... I will add links and any help would be great full
http://www.ebay.co.uk/itm/Bilstein-Susp ... SwNSxVXEfo
https://www.ebay.co.uk/itm/ADJUSTABLE-C ... SwddhZxjAq
Bilstein PSS9 installation guide
Re: Bilstein PSS9 installation guide
The first ones look very close to the ones that I have and work fine . You'll have too clean the coilover body with a wire brush so the threads are good and clean before you adjust them .
Cheers Al
04 c5 rs6 , Ebony Black, Bare shell repaint , Milltek's, PSS9's,Hotchkis Arb's,Gutted precats, hybrid turbos, Bosch 044 ,And an annoying EML light
04 c5 rs6 , Ebony Black, Bare shell repaint , Milltek's, PSS9's,Hotchkis Arb's,Gutted precats, hybrid turbos, Bosch 044 ,And an annoying EML light
- frogracing
- Neutral
- Posts: 9
- Joined: Sun Jan 19, 2025 2:19 pm
- Location: MA USA
- Contact:
Re: Bilstein PSS9 installation guide
If you are landing on this super useful thread like I did, I made a complete DIY video of the install here:
Thanks to the OP for the great info.
Thanks to the OP for the great info.
Froooog the RS4 rally car: https://www.frogracing.us/garage/froooog
RS4 maintenance page: https://www.frogracing.us/tech/car-main ... aintenance
YouTube channel: https://www.youtube.com/user/frogracingvideo
RS4 maintenance page: https://www.frogracing.us/tech/car-main ... aintenance
YouTube channel: https://www.youtube.com/user/frogracingvideo
Who is online
Users browsing this forum: Quinten, steve2003rs6 and 94 guests