Hydraulic Engine Mounts.

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
Post Reply
steve2003rs6
Cruising
Posts: 2956
Joined: Mon Aug 19, 2019 7:43 pm

Hydraulic Engine Mounts.

Post by steve2003rs6 » Fri Nov 10, 2023 1:04 pm

For a while now I have had a intermittent fault logged when I perform a VCDS scan.
It’s now turned into a permanent fault on the right hand engine mount.

Just ordered the right hand mount from Germany.
Apparently the left hand is available in the uk.

Right hand mount 4B3199379 J
Left hand mount 4B3199379 K

Costs approximately £350-£370 each
Last edited by steve2003rs6 on Fri Nov 10, 2023 1:44 pm, edited 2 times in total.

User avatar
Shoppinit
Cruising
Posts: 20318
Joined: Wed Dec 31, 2008 6:24 pm

Re: Hydraulic Engine Mounts.

Post by Shoppinit » Fri Nov 10, 2023 1:08 pm

That's an expensive engine mount.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."

steve2003rs6
Cruising
Posts: 2956
Joined: Mon Aug 19, 2019 7:43 pm

Re: Hydraulic Engine Mounts.

Post by steve2003rs6 » Fri Nov 10, 2023 1:15 pm

They are original Audi Ben.
There are much cheaper mount’s available.
But I like to buy original if they are available and affordable.

The ones currently fitted are originals. So hopefully the new ones will also last 20 years.

Frazz82
2nd Gear
Posts: 235
Joined: Thu Jul 18, 2019 9:59 am

Re: Hydraulic Engine Mounts.

Post by Frazz82 » Fri Nov 17, 2023 8:24 pm

Same here Steve got 2 on order from Meyle as my left one keeps throwing a code.

Cars getting some big money spent on it next few months.

steve2003rs6
Cruising
Posts: 2956
Joined: Mon Aug 19, 2019 7:43 pm

Re: Hydraulic Engine Mounts.

Post by steve2003rs6 » Sun Nov 19, 2023 3:15 pm

Hi Frazz. I looked at the meyle mounts and I almost ordered them.
In the end found out that original mounts were available so went with that.
6 weeks delivery from Germany.

steve2003rs6
Cruising
Posts: 2956
Joined: Mon Aug 19, 2019 7:43 pm

Re: Hydraulic Engine Mounts.

Post by steve2003rs6 » Mon Dec 18, 2023 12:47 pm

Right hand hydraulic engine mount arrived today.
Now to get it booked in for installation.
Realistically I reckon it will be next year.
Need to get a set of 19x9 inch pilot sport 4S tyres first and I think that will also be next year.

Update. RH Hydraulic engine mount installed.
Error code cleared. And it stayed clear.

Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: asgor and 91 guests