Advice Please

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
steve2003rs6
Cruising
Posts: 2955
Joined: Mon Aug 19, 2019 7:43 pm

Re: Advice Please

Post by steve2003rs6 » Wed Sep 15, 2021 11:01 pm

I discussed the fitment of the pipes with unit 20 a while back. They can be done with engine in situ. But a bit of a pain to do.

User avatar
beatsyrs6
Neutral
Posts: 13
Joined: Sun Sep 05, 2021 10:41 pm

Re: Advice Please

Post by beatsyrs6 » Fri Sep 17, 2021 8:44 pm

Right i have tasted the liquid tonight that has been slowly leaking under the car and I am pleased to report that it was very sweet, which I take means that it is coolant and not oil.
I have checked the coolant level and it was basically on the max line so it can’t be a major leak ?
Still coming from the front right hand side tho, so any ideas as to what it could be or where to look ? Hoping to get it up on the ramp this Sunday to have a proper look under it.
P.S. happy Friday everyone!

User avatar
Shoppinit
Cruising
Posts: 20315
Joined: Wed Dec 31, 2008 6:24 pm

Re: Advice Please

Post by Shoppinit » Fri Sep 17, 2021 8:48 pm

That’s where the oil filter housing / heat exchanger is. Poosey pipe, innit? If I were you I’d snap Steve’s arm off.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."

Lander91
3rd Gear
Posts: 375
Joined: Sat Oct 03, 2020 8:12 am

Re: Advice Please

Post by Lander91 » Sat Sep 18, 2021 7:42 am

it's good that it's not a major e.g. enough to effect the pressure capacity of the system. But don't wait to fix it, if/when it becomes a bad leak....

User avatar
beatsyrs6
Neutral
Posts: 13
Joined: Sun Sep 05, 2021 10:41 pm

Re: Advice Please

Post by beatsyrs6 » Sat Sep 18, 2021 3:05 pm

Ok sound, well in that case I think I will buy one off Steve and get in contact with MRC and see if they can help me out with the fitment as they are only 2 hours away from me. Guessing I am going to be looking at a fairly large bill with it being an engine out job :(

steve2003rs6
Cruising
Posts: 2955
Joined: Mon Aug 19, 2019 7:43 pm

Re: Advice Please

Post by steve2003rs6 » Sat Sep 18, 2021 4:02 pm

Another poosey pipe on its way to Ireland.
Thank you Simon.

User avatar
beatsyrs6
Neutral
Posts: 13
Joined: Sun Sep 05, 2021 10:41 pm

Re: Advice Please

Post by beatsyrs6 » Sat Sep 18, 2021 4:52 pm

steve2003rs6 wrote:
Sat Sep 18, 2021 4:02 pm
Another poosey pipe on its way to Ireland.
Thank you Simon.
Please could I buy a replacement pipe Steve ?

steve2003rs6
Cruising
Posts: 2955
Joined: Mon Aug 19, 2019 7:43 pm

Re: Advice Please

Post by steve2003rs6 » Sat Sep 18, 2021 4:58 pm

Yes mate. Will send you a pm.
And another poosey pipe sent.

steve2003rs6
Cruising
Posts: 2955
Joined: Mon Aug 19, 2019 7:43 pm

Re: Advice Please

Post by steve2003rs6 » Sat Sep 18, 2021 8:28 pm

beatsyrs6 wrote:
Sat Sep 18, 2021 3:05 pm
Ok sound, well in that case I think I will buy one off Steve and get in contact with MRC and see if they can help me out with the fitment as they are only 2 hours away from me. Guessing I am going to be looking at a fairly large bill with it being an engine out job :(
It’s not a engine out job. Unit 20 have done lots with engine in situ.

bilko1
Top Gear
Posts: 1872
Joined: Fri Aug 27, 2010 12:13 am
Location: Bournemouth,Dorset, UK

Re: Advice Please

Post by bilko1 » Sat Sep 18, 2021 8:56 pm

Grizz did mine while I waited, it was a long wait :)
Avus Avant, RNS-E mk2 with sds and Bluetooth, Milltek, Hotchkis, Bilstein, Forge, ITG, A.C.E, Wagner, FBMFSW, MTM.

Gregstv
3rd Gear
Posts: 273
Joined: Tue Oct 03, 2017 11:35 am

Re: Advice Please

Post by Gregstv » Sat Sep 18, 2021 10:38 pm

If you have axillary radiators behind the intercoolers check them and the hoses for leaks as well.

User avatar
Gav66
3rd Gear
Posts: 383
Joined: Tue Apr 18, 2017 8:04 pm
Location: Scotland

Re: Advice Please

Post by Gav66 » Mon Oct 04, 2021 5:55 pm

Mine had the same coolant leak, passenger side front bumper, turned out it was the auxiliary radiator which I have taken off to get repaired in the meantime I have run a pipe connecting inlet and outlet.

Mɐʇʇ
Cruising
Posts: 2725
Joined: Tue Oct 07, 2014 8:30 pm

Re: Advice Please

Post by Mɐʇʇ » Tue Oct 05, 2021 4:05 pm

It makes me smile every time I see call that pipe by it's correct name. :)
"not a professional engineer, mechanic and mechanist"

steve2003rs6
Cruising
Posts: 2955
Joined: Mon Aug 19, 2019 7:43 pm

Re: Advice Please

Post by steve2003rs6 » Thu Oct 07, 2021 11:50 am

Which one makes you smile Matt
Bufkin pipe
Poosey pipe.
It surprised me how many pipes were sent.
Only a small amount left from the 24 that were manufactured.
Even though they were made to the original drawing dimensions.
I will feel a lot better when someone has installed one.
As this will be the true test that they are ok.

Mɐʇʇ
Cruising
Posts: 2725
Joined: Tue Oct 07, 2014 8:30 pm

Re: Advice Please

Post by Mɐʇʇ » Thu Oct 07, 2021 11:57 am

Poosey pipe, obvs. You've picked up the mantle
"not a professional engineer, mechanic and mechanist"

Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: Bing [Bot], rshales007, S3ADF and 71 guests