Stands...
Stands...
Anyone knows what brand/type these are, never seen these before...these are interesting if a ramp doesnt fit the garage...dont know if it goes up with hydraulics.
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Re: Stands...
Interesting! Looks to me like 4 x motorcycle scissor jacks have been used, if they are then can be sourced easily, although they are rated to about 450kg each! unusual way of lifting a heavy car but if it works......... 
Re: Stands...
They are mechanical. You can see the nut at the top for raising / lowering.
They don't look very substantial. Still, that can be deceiving.
They don't look very substantial. Still, that can be deceiving.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Re: Stands...
Guys
Check out eBay item 190900932163 I think those are the ones or look very similar.
Check out eBay item 190900932163 I think those are the ones or look very similar.
-
Mr Footlong
- Cruising
- Posts: 4331
- Joined: Thu Nov 10, 2011 12:07 pm
Re: Stands...
They are identical.
Current:
23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung
Gone:
"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung
Gone:
"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Re: Stands...
You'd think he'd have order them in pink to match his car...mavada wrote:
No matter where you go, there you are.
Re: Stands...
thanks for the link, found these...Eatmydust wrote:Guys
Check out eBay item 190900932163 I think those are the ones or look very similar.
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Re: Stands...
They are a good set of hydraulic ramps ideal for lowered cars, I've got a set somewhere, they have a locking mechanism which prevents them from collapsing, mine I think are rated to 900kg each, you can get a 1500kg pair also. I believe they cost about £400 ish.
Re: Stands...
Not sure I'd they do pink though bam.... 
Re: Stands...
I'd love a set, but my garage is full of tools/benches and my driveway is slightly inclined. I'll just have to stick with loads of trolley jacks and axle stands.
Daytona RS6 Avant
Rule #36 - At least one gear shall be dropped for every tunnel travelled
** NOW AVAILABLE ** C5 RS6 Cambelt Tool kit rental (also fits other models 3.7/4.2 V8 engines)
Rule #36 - At least one gear shall be dropped for every tunnel travelled
** NOW AVAILABLE ** C5 RS6 Cambelt Tool kit rental (also fits other models 3.7/4.2 V8 engines)
Re: Stands...
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Re: Stands...
Clever idea , but you still have to get the wheels on the ramp without taking the front underside off first
The ebay ones are only rated at 498KG , the MAX limit of 4 is only 2000kg !!
The ebay ones are only £44.45 in sterling PLUS £200 shipping to the UK LOL
The ebay ones are only rated at 498KG , the MAX limit of 4 is only 2000kg !!
The ebay ones are only £44.45 in sterling PLUS £200 shipping to the UK LOL
Re: Stands...
Guys I got a set made makes all the difference as he custom made the ramp from your measurements, then you can take the ramps off for easier access. Made in Scotland.
www.ramps4cars.co.uk/custom_ramps2.html ... su9y4y.jpg[/img]
www.ramps4cars.co.uk/custom_ramps2.html ... su9y4y.jpg[/img]
Re: Stands...
3rd pic from the bottom in your link star7 .............argghhhhhhhh !!!!