Intake Q

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
Post Reply
User avatar
SSASSC1
Neutral
Posts: 10
Joined: Fri Sep 14, 2012 10:33 am

Intake Q

Post by SSASSC1 » Sun Sep 23, 2012 7:31 am

Hi Guys

Decided to pull my airbox and intake off over the weekend. Pulled out the MAFs and gave them a good clean and then did a ECU reset. Can runs much smoother IMO..

Anyway, When the intake was off noticed that one of the airbox supports were missing and there was a hole in the manifold. Pic below

Image

Car runs great but I'm not sure having a open hole in the manifold is a good idea?

Should I plug it up?

Cheers, John
Top
User avatar
Shoppinit
Cruising
Posts: 20308
Joined: Wed Dec 31, 2008 6:24 pm

Re: Intake Q

Post by Shoppinit » Sun Sep 23, 2012 8:40 am

Where's the hole?
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Top
User avatar
SSASSC1
Neutral
Posts: 10
Joined: Fri Sep 14, 2012 10:33 am

Re: Intake Q

Post by SSASSC1 » Sun Sep 23, 2012 9:04 am

Hi

If you look closely at the picture you will see 2 x red circles (crappy photo chop attempt) on the manifold. The holes are there
Top
User avatar
Shoppinit
Cruising
Posts: 20308
Joined: Wed Dec 31, 2008 6:24 pm

Re: Intake Q

Post by Shoppinit » Sun Sep 23, 2012 9:19 am

Image

You mean these location holes for the airbox locating lugs?

Image
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Top
User avatar
SSASSC1
Neutral
Posts: 10
Joined: Fri Sep 14, 2012 10:33 am

Re: Intake Q

Post by SSASSC1 » Sun Sep 23, 2012 9:24 am

Yeah that's it

One of the lugs are missing from underneath the intake box, hence one of the holes are exposed.

That bad?
Top
User avatar
Shoppinit
Cruising
Posts: 20308
Joined: Wed Dec 31, 2008 6:24 pm

Re: Intake Q

Post by Shoppinit » Sun Sep 23, 2012 9:28 am

Audi are partial to a bit of silly engineering, but even they wouldn't leave gaping holes into the inlet manifold. Those holes don't go into the inlet.
But you do need new grommets, and a new airbox by the sound of it. Looks like your car has had some rough loving.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Top
User avatar
SSASSC1
Neutral
Posts: 10
Joined: Fri Sep 14, 2012 10:33 am

Re: Intake Q

Post by SSASSC1 » Sun Sep 23, 2012 10:45 am

Thx for that.

Yep, she is a bit "tardy" right now, but I aim to fix her up :)
Top
Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: No registered users and 54 guests