Kerbed alloy, thanks misses!!

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
User avatar
MalcolmSu
4th Gear
Posts: 757
Joined: Mon Mar 03, 2008 8:26 pm
Location: Falkirk, Scotland
Contact:

Re: RE: Re: RE: Kerbed alloy, thanks misses!!

Post by MalcolmSu » Mon Sep 20, 2010 10:04 pm

Wolverine wrote:....... http://www.youtube.com/watch?v=-ITp2f0nNis

And can be fitted at your house or work by a mobile fitter ......

http://www.etyres.co.uk/alloygator
when new I think the black or silver look ok - but once kerbed i agree they look a bit silly. I can imagine driving along with bits flailing after a while...

User avatar
MalcolmSu
4th Gear
Posts: 757
Joined: Mon Mar 03, 2008 8:26 pm
Location: Falkirk, Scotland
Contact:

Re: RE: Re: RE: Kerbed alloy, thanks misses!!

Post by MalcolmSu » Mon Sep 20, 2010 10:04 pm

Wolverine wrote:....... http://www.youtube.com/watch?v=-ITp2f0nNis

And can be fitted at your house or work by a mobile fitter ......

http://www.etyres.co.uk/alloygator
when new I think the black or silver look ok - but once kerbed i agree they look a bit silly. I can imagine driving along with bits flailing after a while...

User avatar
MalcolmSu
4th Gear
Posts: 757
Joined: Mon Mar 03, 2008 8:26 pm
Location: Falkirk, Scotland
Contact:

RE: Re: RE: Re: RE: Kerbed alloy, thanks misses!!

Post by MalcolmSu » Mon Sep 20, 2010 10:06 pm

apologies - i was getting an error message saying my reply hadn't posted! :oops:

Fizmo100
2nd Gear
Posts: 136
Joined: Sun Aug 15, 2010 1:08 am
Location: Cheshire

RE: Re: RE: Re: RE: Kerbed alloy, thanks misses!!

Post by Fizmo100 » Tue Sep 21, 2010 12:29 am

Ok, before you judge me, remember that I gave this information voluntarily, and I see this forum as a 'safe space'...

Here goes...

When I bought my 6 the wheels were already kerbed.

I haven't had them refurbed because I know I will only do them again myself, and can't bear the self loathing.

Since having the car (all of two months) I have kerbed the nearside front wheel twice.

*Deep breath.*

My name is Danny... and I am a **** parker.

:oops:

bam_bam
Cruising
Posts: 14440
Joined: Mon Jan 18, 2010 9:08 pm
Location: London

RE: Re: RE: Re: RE: Kerbed alloy, thanks misses!!

Post by bam_bam » Tue Sep 21, 2010 12:43 am

I lol'd.

Danny, you want to see pain? Swing by First Methodist Tuesday nights. See the guys with curbed spinners. That's pain.
- Fight Club

Imagine curbing these things :shock:

Image
No matter where you go, there you are.

rosssavage
Neutral
Posts: 31
Joined: Wed May 19, 2010 6:25 pm
Location: London

RE: Re: RE: Re: RE: Kerbed alloy, thanks misses!!

Post by rosssavage » Tue Sep 21, 2010 3:15 pm

ha ha, I hear you Danny. I've had mine for a few months now and the wheels were really bad when I got it. I've not got mine re-done for the same reason (being a ****parker).

It's strangely liberating in a sick and a bit wrong kind of way

monoi
2nd Gear
Posts: 162
Joined: Tue May 04, 2010 8:34 pm

Post by monoi » Tue Sep 21, 2010 9:25 pm

It took my wife less than 2 weeks to kerb all 4 wheels.

Then again, I knew what to expect :twisted: after she hit a kerb with my 89 635csi (not a large car), with me in the car, trying to go round a sleeping policeman.

I could not quite believe it, and I just had the wheels done.

ollys
4th Gear
Posts: 816
Joined: Fri Feb 22, 2008 1:05 am

Re: RE: Kerbed alloy, thanks misses!!

Post by ollys » Wed Sep 22, 2010 10:14 am

ollys wrote:
bam_bam wrote:I feel your pain. I did a job on my near-side while in France, including a chunk out of the tyre.
My ho was leaning out of the car trying to reach a French toll booth, she kept saying "closer", to which I'd say "is there enough room for the wheel?". She'd reply "YES, get closer, I'm not going to be able to reach", so I say "are you sure the wheel won't hit the curb?", she says "yes, there's loads of room". So I roll about 2inches forward and receive the most horrible grind against the toll booth high gutter. She throws in the coins, slides back into her seat, buckles up and squeals "OK, let's go!", smiling at me oblivious as to why my face has blossomed into an incandescent purple picture of the anti-christ.
Needless to say that I was vibrating with anger before a large argument erupted along the lines of me wanting to readjust her spatial awareness using my pimp-hand and one of her expensive high heels. Every toll booth there after (and there were many), I pulled up so far from the booth, she practically had to shag a passing truckdriver in exchange for a lift the rest of the distance to the money chute.
To top it off, HRE said their powdercoats are special order and only available if the wheels were sent to them, in the USA. Pack of roosters.
:D :D :D :D LOL!!!!
I feel your pain...and your post made me laugh
Maybe I should just add that my Missus kerbing antics saw 6 new tyres in 18 months, that was AFTER i had replaced all four all round :shock:

That's £1,500 in GYE F1s

User avatar
ChrisRS6
3rd Gear
Posts: 338
Joined: Tue Aug 17, 2010 12:03 pm
Location: Gloucestershire

RE: Re: RE: Kerbed alloy, thanks misses!!

Post by ChrisRS6 » Mon Oct 11, 2010 9:25 pm

I've just joined the club...
New owner for about 2 months now. Wife used the car 3 times on her own...curbing tally now stands at 3 (but to be fair she managed to curb 2 in the same trip so she does have one non-curbing trip under her belt!!!). Old owner was very fastidious and we bought it after he had recently taken all 4 wheels off for a full clean polish and wax seal so they were looking factory-fresh!

I know if I book it in for a re-furb it will happen again.
*SOLD* - currently looking for a replacement
03 Missano Red Avant
Silver Leather, H&Rs, Dension iPod Connection kit
85k miles

User avatar
DAylward
2nd Gear
Posts: 142
Joined: Thu Dec 28, 2006 12:30 am
Location: Portsmouth

RE: Re: RE: Kerbed alloy, thanks misses!!

Post by DAylward » Mon Oct 11, 2010 9:53 pm

ive just had my C6 wheels refurbed and colour change due to bit of a mishap with a curb.I now have to get a taxi to the kerb whenever i park now :)
2003 RS6 Avant
Avus Silver
KWv3 Coilovers
Hotchkiss ARBs
Wagner carbon fibre intercoolers
Milltek resonated cat back
20" C6 RS6 alloys
Kenwood multimedia centre
Unit 20 engine and gearbox remap

iR8V10
Top Gear
Posts: 2131
Joined: Sun Feb 04, 2007 3:37 pm
Location: Sussex

Re: RE: Re: RE: Kerbed alloy, thanks misses!!

Post by iR8V10 » Mon Oct 11, 2010 9:58 pm

DAylward wrote:ive just had my C6 wheels refurbed and colour change due to bit of a mishap with a curb.I now have to get a taxi to the kerb whenever i park now :)
Get some pics up man!
Current: R8 V10+ Gen2: Dynamite Red
SOLD: R8 V10: Exclusive OEM + Spec: http://forum.rs246.com/viewtopic.php?f=38&t=103976
SOLD: S3 8L: The daily: http://forum.rs246.com/viewtopic.php?f= ... y+noggy+s3

User avatar
DAylward
2nd Gear
Posts: 142
Joined: Thu Dec 28, 2006 12:30 am
Location: Portsmouth

RE: Re: RE: Re: RE: Kerbed alloy, thanks misses!!

Post by DAylward » Mon Oct 11, 2010 10:16 pm

I dont have any pics yet other than one that someone took at ADI on saturday.They have gone from the standard colour to a dark anthracite (wanted titan grey but they didnt have it) but it really suits the car and i am really chuffed with them.I will find the pic and post it just for you Dave :)
found it (sorry for going slightly off topic,blame Dave ;))

Image

Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: Bing [Bot] and 104 guests