Hi thanks for letting me join the forum

New to the forum? Say "hello"
Post Reply
Pranger081
Neutral
Posts: 1
Joined: Sun Jul 14, 2019 11:37 am

Hi thanks for letting me join the forum

Post by Pranger081 » Sun Jul 14, 2019 11:45 am

Ive a 2007 Rs4 b7 its just failed its M.O.T on its break discs all round i know you have to buy the rear break discs as a complete unit hub and disc but my question is can you buy just the front rotors with the hub if so where could i get them from as need to be genuine as i like to keep it to the original spec ?

Lady Penelope
2nd Gear
Posts: 247
Joined: Fri May 22, 2015 3:09 pm

Re: Hi thanks for letting me join the forum

Post by Lady Penelope » Sun Jul 14, 2019 5:33 pm

Might be worth asking site sponsors Crewe Audi and see what they say/deals they offer?

Site sponsors want business from us.

P
RS4 B7 2007 Cabriolet Misano Red
Revolution carbon air intake, KW adjustable springs, Da Vinci 20" summer rims, OEM 19" winter chrome and black rims, Audi Ceramic front brakes, Milltek cat back non resonated valved exhaust, US spec black front grill, MRC stage 2, Piano black interior + cream leather buckets. EM Tuning dragon eyes and xenon upgrade, TTRS FBMF steering wheel, TV, Reversing camera, Nav, Red leather fitted luggage.

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Hi thanks for letting me join the forum

Post by MikeFish » Sun Jul 14, 2019 5:45 pm

The fronts normally only come as a complete unit too. Some aftermarket discs come spepratley though. There might be an aftermarket disc that will fit the standard bells but I think this still costs more than the oem ones.

Quango86
2nd Gear
Posts: 151
Joined: Thu Jan 31, 2019 2:08 pm

Re: Hi thanks for letting me join the forum

Post by Quango86 » Sun Jul 14, 2019 6:00 pm

MikeFish wrote:
Sun Jul 14, 2019 5:45 pm
The fronts normally only come as a complete unit too. Some aftermarket discs come spepratley though. There might be an aftermarket disc that will fit the standard bells but I think this still costs more than the oem ones.
Reyland do a good set and you use the original bell. I paid 380 for a pair with straight grooves
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.

Post Reply

Return to “Welcome Area”

Who is online

Users browsing this forum: No registered users and 93 guests