RNS-E Installation into a B5 RS4

Discussion forum for ICE, Security, SatNav, etc....
User avatar
JonnyX
5th Gear
Posts: 1179
Joined: Mon May 26, 2003 1:40 pm
Location: Hampshire

Post by JonnyX » Fri Feb 08, 2008 11:08 am

http://home.comcast.net/~mtaylor68/rnseinstall.htm


Slightly less rare than rocking horse <beep> and hens teeth.
MY 2000 S4
Ebony Pearl
Stage 3 (MRC 400 (ish))
Apexcone 50w HIDS

User avatar
PetrolDave
Cruising
Posts: 7599
Joined: Mon Nov 07, 2005 11:28 am
Location: Southampton, Hampshire UK

Post by PetrolDave » Fri Feb 08, 2008 11:21 am

g60bv wrote:which head unit is the one to go for. they all seem to have slightly different numbers and seeing as there close to 500 quid, i cant afford to get the wrong one.!
You need a 4B0 035 192 P - that's a European model RNS-E for a C5 A6, which is the closest fit for a B5 A4/S4/RS4.

Try looking here for part number info:

http://www.navplus.us/forum/viewtopic.php?t=2

AdamS4
4th Gear
Posts: 650
Joined: Tue May 16, 2006 5:40 am
Location: Gatwick, West Sussex
Contact:

Post by AdamS4 » Thu Feb 14, 2008 10:20 am

TDiAvant wrote:No, trying to complete a dash transplant would be a massive job, and I don't think it would fit.

To retrofit fit RNS-E into your car, would require the following parts

Double Din Centre console
Double Din Cage
Double Din Air Con unit (I think you could get one form ebay)
Double Din gearstick surround
Double Din ashtray (Not required if you don't smoke)
Audi Navigation Unit (A6 Version)
Wiring harness with can-bus
GPS Antenna
Switches (hazard waring etc)


It's not a massive job and an be easily complete 4-5 hours
Is that the same for the facelift ?
Image

User avatar
JonnyX
5th Gear
Posts: 1179
Joined: Mon May 26, 2003 1:40 pm
Location: Hampshire

Post by JonnyX » Thu Feb 14, 2008 10:26 am

Yes, if your facelift is single DIN (i.e. concert stereo)
MY 2000 S4
Ebony Pearl
Stage 3 (MRC 400 (ish))
Apexcone 50w HIDS

AdamS4
4th Gear
Posts: 650
Joined: Tue May 16, 2006 5:40 am
Location: Gatwick, West Sussex
Contact:

Post by AdamS4 » Thu Feb 14, 2008 4:41 pm

Mines like this...

Image
Image

User avatar
JonnyX
5th Gear
Posts: 1179
Joined: Mon May 26, 2003 1:40 pm
Location: Hampshire

Post by JonnyX » Thu Feb 14, 2008 5:46 pm

That's concert which is single DIN
MY 2000 S4
Ebony Pearl
Stage 3 (MRC 400 (ish))
Apexcone 50w HIDS

Jesper Rs4
Neutral
Posts: 6
Joined: Mon Mar 10, 2014 10:35 pm

Re: RNS-E Installation into a B5 RS4

Post by Jesper Rs4 » Tue Aug 24, 2021 8:43 pm

Hi,

I have some problems with my rs4 b5 / RNS-E setup,

i would like to get the DIS to work, does anyone know what pins i need to connect my canbus H/L from rns to kombi? is it grey connector pin 5 and 6?


regards
jesper.
Using Tapatalk

Post Reply

Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 67 guests