ECU Fault code? Internal Control Module Memory Error

2.2 I5 20v turbo - 220bhp
2.2 I5 20v turbo - 230bhp
Post Reply
newsh
Neutral
Posts: 14
Joined: Sat Jan 15, 2005 12:57 pm

ECU Fault code? Internal Control Module Memory Error

Post by newsh » Fri Dec 28, 2007 11:07 pm

What does this one mean? (Engine was not running hence 00513 G28)

If I just switch on the ignition and pull the codes I get the fault come up, if I clear the codes, get no faults, and then switch off and on again the fault always reappears. If I start the engine, clear the faults and restart it doesn't reappear, stop the engine and switch back on but do not start, it reappears again.



VAG-COM Version: Release 311.2-N

Control Module Part Number: 895 907 404 BA
Component and/or Version: MOTOR MRC 1
Software Coding: 0261200484
Work Shop Code: 1267356560

2 Faults Found:
65535 - Internal Control Module Memory Error
00-00 - -

00513 - Engine Speed Sensor (G28)
03-00 - No Signal

newsh
Neutral
Posts: 14
Joined: Sat Jan 15, 2005 12:57 pm

RE: ECU Fault code? Internal Control Module Memory Error

Post by newsh » Fri Jan 11, 2008 12:07 am

Bump?

Mihnea? Please?

ericd
Neutral
Posts: 7
Joined: Sun Jun 29, 2003 2:16 pm

Re: RE: ECU Fault code? Internal Control Module Memory Error

Post by ericd » Mon Jan 14, 2008 7:59 pm

John,

2 possible reasons I can remember for the error were a bad earth connection or more likely an internal checksum error ( without going into grizzly details) , modified/reprogrammed devices, like all devices generate checksums for various reasons, it's usually just the sign of a 'chipped' device being present , it's possible to hide , but a lot don't bother, like Nothelle etc.


-eric

Post Reply

Return to “S2”

Who is online

Users browsing this forum: No registered users and 36 guests