Wheel nut torque sttings

[Munchingmolar]

Anyone ? Seen various from 90 to 105 ft lbs !

[Dannyboy123]

Audi spec for the RS4 is 120nm

[PieterZ]

Audi spec for the RS4 is 120nm

Correct.

[Brooner]

Yep 120 nm just change to my summer wheels this is the torque setting i use and re check the torque after a 30 mile run

[Munchingmolar]

[RS Owner]

Anyone ? Seen various from 90 to 105 ft lbs !

Audi spec for the RS4 is 120nm

and 120 Nm is 90 lb-ft so the lower end of your estimate

[StewamEmiya37]

Suppose you tighten the fasteners with less force than necessary, then under the influence of vibrations. In that case, the threaded connection can unwind without providing the necessary tightness between the fastened parts, which can lead to serious consequences. On the contrary, if you apply more force to the hardware than is required, the destruction of the threaded connection or the fastened parts will occur; for example, a thread failure or the appearance of cracks in the parts may occur. In addition, remember that you need to buy special bolts. I recommend a store where I always buy power tool accessories and hardware. I think you'll find everything you need there.

[Brooner]

There you go 120nm from the owners manual