Start stop button

2.9 V6 24v TFSI - 444 bhp
Post Reply
User avatar
Brooner
Cruising
Posts: 3962
Joined: Mon Jan 20, 2003 5:12 am
Location: Scotlandshire

Start stop button

Post by Brooner » Fri Jun 21, 2019 4:49 am

Hi any guru's out there managed to code the button to remember its last setting
I know its no hard ship to press it on start up but i just keep forgetting and think the car has stalled then realise the start stop is active
I managed to get the coding for my wife's SQ5 a few years back but not see anything for the B9
2018 B9 RS4 Navarra Blue
2013 B8 RS4 Sepang Blue
2007 B7 RS4 Avant Sprint Blue
2001 B5 RS4 Nogaro Blue
1998 B5 S4 Avant Kingfisher Blue
1993 B4 S2 Avant laser Red

User avatar
Graeme4130
Cruising
Posts: 3801
Joined: Thu Dec 22, 2011 12:58 pm

Re: Start stop button

Post by Graeme4130 » Fri Jun 21, 2019 8:46 am

I appreciate this doesn't answer your questions, but I tend to drive my car always in S mode, and the Start/Stop ruction is de-activated in that mode
-------------------------------------------------------
Gone - 11/06 B7 RS4 Avant - black/black (Daily drive & kids taxi)
Gone - 05/13 B8 RS4 Avant - Suzuka grey (Daily drive & kids taxi)
Gone - 01/14 B8 RS5 Coupe - Short term car
Gone - 09/14 B8 RS4 Avant - Misano Red/Ceramics (Daily drive & kids taxi)

Current - 04/18 B9 Rs4 Nardo Grey
ZX10R Race bike - 210bhp and a few skid marks on the seat ;)

User avatar
Brooner
Cruising
Posts: 3962
Joined: Mon Jan 20, 2003 5:12 am
Location: Scotlandshire

Re: Start stop button

Post by Brooner » Fri Jun 21, 2019 9:43 am

Cheers Graeme
I never new that S mode disabled the stop star function good to know
I have the car in dynamic all the time but switch to D until oil warmed up the on to manual mode

Ill give the S mode a go
But will still try and find a coding solution
2018 B9 RS4 Navarra Blue
2013 B8 RS4 Sepang Blue
2007 B7 RS4 Avant Sprint Blue
2001 B5 RS4 Nogaro Blue
1998 B5 S4 Avant Kingfisher Blue
1993 B4 S2 Avant laser Red

User avatar
RS Owner
3rd Gear
Posts: 451
Joined: Sun Aug 17, 2008 3:12 pm

Re: Start stop button

Post by RS Owner » Fri Jun 21, 2019 8:32 pm

I also would love to be able to do the same so please let me know if you manage it. :thumbs:
I tried a tool called OBDeleven but had no luck (could be just me but I have not found anyone else who managed to code out stop/start on a B9).
The Vagcom people say they can do it, at a much higher cost than OBD11 but again I could not get any independent verification.
Coding a BMW is much easier so I'm not sure why Audi make it so difficult (I'm assuming the problem is protection added by Audi).
Current : 2018 F5 RS5 (Let's Fire Up the Quattro)
Gone : 2017 M3 CP
Gone : 2007 B7 RS4 ( :kissmyrings: )

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Start stop button

Post by MikeFish » Sat Jun 22, 2019 8:07 pm

It was possible on the C7 as I did it to mine. I'm sure it is possible on the B9 too, but maybe no-one has worked out the coding yet.

User avatar
Brooner
Cruising
Posts: 3962
Joined: Mon Jan 20, 2003 5:12 am
Location: Scotlandshire

Re: Start stop button

Post by Brooner » Sun Jun 23, 2019 9:03 am

Aye there are a few different coding versions out there ill give them a go and report back
2018 B9 RS4 Navarra Blue
2013 B8 RS4 Sepang Blue
2007 B7 RS4 Avant Sprint Blue
2001 B5 RS4 Nogaro Blue
1998 B5 S4 Avant Kingfisher Blue
1993 B4 S2 Avant laser Red

Post Reply

Return to “RS4 (B9 Typ 8W) 2017-”

Who is online

Users browsing this forum: No registered users and 63 guests