RS4 B9 picture thread

[Covkiller]

MikeBent - more photos please, this looks proper smart

[TSTRS4]

Different, I like it

Many thanks!

[Jeloz]

Hey Guys

This is my mad RS4 B9 2018 ride! Audi

[535dboy]

There is one going around my way in that colour and I have to say it looks classy

[Jeloz]

There is one going around my way in that colour and I have to say it looks classy

Thanks mate!

[Ian_C]

Stunning!!

[Brooner]

Oh yes loverly

[AJ13]

look's far better in the metal than in the pictures

I have Sonamo and black. It looks 10 million times better in the flesh. But you need to either paint the wheels or swap them. The graphite colours clash with green and black.

And then there’s the spacing issue. I have 15mm front and 20mm back which is super aggressive but worth it.

[PieterZ]

Nice! Correct about the wheels black looks awesome.

[J88NOG]

look's far better in the metal than in the pictures

I have Sonamo and black. It looks 10 million times better in the flesh. But you need to either paint the wheels or swap them. The graphite colours clash with green and black.

And then there’s the spacing issue. I have 15mm front and 20mm back which is super aggressive but worth it.

The wheel spacing is a bit odd from factory - maybe there are some regs about wheels/tyres not falling outwith the overall footprint of the bodyshell - I seem to remember hearing that the little plastic fender sticking out from the rear wheel arch on some older models (A3/A5?) was designed to defeat that and allow wider track. That could be nonsense though.

Have you had any issues with rubbing at that spacing? I have the standard 19"s and have 12mm spacers to fit all round, but then I think they have 2mm less offset than the 20"s and so should be no problem.

[AJ13]

No rubbing on the back. On the front i removed the little screw and clip that sticks out towards the top of the wheel arch. It’s an additional clip to hold the arch liner in place, but there are 11 other clips and screws so I think it will be fine! And better still, no rubbing.

[Jeloz]

I set up an Audi Instagram account for my RS4 if interested.

rs4jlz

[AndyL]

look's far better in the metal than in the pictures

I have Sonamo and black. It looks 10 million times better in the flesh. But you need to either paint the wheels or swap them. The graphite colours clash with green and black.

And then there’s the spacing issue. I have 15mm front and 20mm back which is super aggressive but worth it.

The wheel spacing is a bit odd from factory - maybe there are some regs about wheels/tyres not falling outwith the overall footprint of the bodyshell - I seem to remember hearing that the little plastic fender sticking out from the rear wheel arch on some older models (A3/A5?) was designed to defeat that and allow wider track. That could be nonsense though.

Have you had any issues with rubbing at that spacing? I have the standard 19"s and have 12mm spacers to fit all round, but then I think they have 2mm less offset than the 20"s and so should be no problem.

I have the standard 19's and have fitted 12mm spacers front and 15mm spacers rear, I have also removed the front fender screw. I have had zero rubbing issues with it, even when driven had down country lanes.

[J88NOG]

I have Sonamo and black. It looks 10 million times better in the flesh. But you need to either paint the wheels or swap them. The graphite colours clash with green and black.

And then there’s the spacing issue. I have 15mm front and 20mm back which is super aggressive but worth it.

The wheel spacing is a bit odd from factory - maybe there are some regs about wheels/tyres not falling outwith the overall footprint of the bodyshell - I seem to remember hearing that the little plastic fender sticking out from the rear wheel arch on some older models (A3/A5?) was designed to defeat that and allow wider track. That could be nonsense though.

Have you had any issues with rubbing at that spacing? I have the standard 19"s and have 12mm spacers to fit all round, but then I think they have 2mm less offset than the 20"s and so should be no problem.

I have the standard 19's and have fitted 12mm spacers front and 15mm spacers rear, I have also removed the front fender screw. I have had zero rubbing issues with it, even when driven had down country lanes.

Thanks - good to know. Are you pleased with the stance now? Mine will be going on later in the week.

[AndyL]

The wheel spacing is a bit odd from factory - maybe there are some regs about wheels/tyres not falling outwith the overall footprint of the bodyshell - I seem to remember hearing that the little plastic fender sticking out from the rear wheel arch on some older models (A3/A5?) was designed to defeat that and allow wider track. That could be nonsense though.

Have you had any issues with rubbing at that spacing? I have the standard 19"s and have 12mm spacers to fit all round, but then I think they have 2mm less offset than the 20"s and so should be no problem.

I have the standard 19's and have fitted 12mm spacers front and 15mm spacers rear, I have also removed the front fender screw. I have had zero rubbing issues with it, even when driven had down country lanes.

Thanks - good to know. Are you pleased with the stance now? Mine will be going on later in the week.

It is much better than stock, however it could probably do with another 2mm at the front and the rear to make it perfect.