B9 Milltek exhaust owners in UK

2.9 V6 24v TFSI - 444 bhp
Post Reply
benpoulter_
Neutral
Posts: 4
Joined: Sun Jan 23, 2022 10:31 pm

B9 Milltek exhaust owners in UK

Post by benpoulter_ » Sun Jan 23, 2022 10:38 pm

Hi folks,

Are there any B9 RS4 owners that have a Milltek exhaust (non-res or Road+) in the Yorkshire area or North of England? I am thinking of getting a Road+ fitted, I've listened to various YouTube videos of both but they don't give you a true idea of how the exhaust will sound. Looking to meet up with someone who has one fitted so I can hear it in person before making the decision. Would be a great help!

benpoulter_
Neutral
Posts: 4
Joined: Sun Jan 23, 2022 10:31 pm

Re: B9 Milltek exhaust owners in UK

Post by benpoulter_ » Sun Jan 23, 2022 10:43 pm

:FIREdevil:
122677cc7a19466992d15fb9cff28051.jpg.jpg
Pic of the motor

User avatar
rjwojcik
2nd Gear
Posts: 237
Joined: Fri Sep 10, 2010 9:21 pm

Re: B9 Milltek exhaust owners in UK

Post by rjwojcik » Sun Jan 23, 2022 10:45 pm

Enjoy!!!
2022 RS4 - Turbo Blue / Black
Gone: 2018 RS4 - Navarra Blue / Black, 2016 A6 BiTDI - Midnight Blue / Black, 2016 Golf GTD with a "lot" of toys, 2016 M3 CP - Mineral Grey / Black, 2009 135i - Le Mans Blue / Black

jamiemcd
Neutral
Posts: 14
Joined: Sun Aug 22, 2021 10:23 pm

Re: B9 Milltek exhaust owners in UK

Post by jamiemcd » Mon Jan 24, 2022 12:55 am

I've not heard the Milltek, but mine has a Remus exhaust on and it's very lovely.

benpoulter_
Neutral
Posts: 4
Joined: Sun Jan 23, 2022 10:31 pm

Re: B9 Milltek exhaust owners in UK

Post by benpoulter_ » Wed Jan 26, 2022 7:00 pm

Hi Jamie,

The Remus sounds pretty good on videos, where abouts are you located?

jamiemcd
Neutral
Posts: 14
Joined: Sun Aug 22, 2021 10:23 pm

Re: B9 Milltek exhaust owners in UK

Post by jamiemcd » Thu Jan 27, 2022 9:11 am

benpoulter_ wrote:
Wed Jan 26, 2022 7:00 pm
Hi Jamie,

The Remus sounds pretty good on videos, where abouts are you located?
I'm in Shropshire, so a bit of a trek from your neck of the woods I'm afraid!

benpoulter_
Neutral
Posts: 4
Joined: Sun Jan 23, 2022 10:31 pm

Re: B9 Milltek exhaust owners in UK

Post by benpoulter_ » Thu Jan 27, 2022 10:23 am

jamiemcd wrote:
Thu Jan 27, 2022 9:11 am
benpoulter_ wrote:
Wed Jan 26, 2022 7:00 pm
Hi Jamie,

The Remus sounds pretty good on videos, where abouts are you located?
I'm in Shropshire, so a bit of a trek from your neck of the woods I'm afraid!
I'm quite interested in the Remus. Read reports of Milltek's rattling and some where they just flat out dont work the valved dont work which doesnt scream build quality. Do you have the non-res with downpipe & did you need to do any modifications on the car to accomdate it, is there any drone in comfort mode on the motorway?

jamiemcd
Neutral
Posts: 14
Joined: Sun Aug 22, 2021 10:23 pm

Re: B9 Milltek exhaust owners in UK

Post by jamiemcd » Fri Jan 28, 2022 11:57 pm

benpoulter_ wrote:
Thu Jan 27, 2022 10:23 am
jamiemcd wrote:
Thu Jan 27, 2022 9:11 am
benpoulter_ wrote:
Wed Jan 26, 2022 7:00 pm
Hi Jamie,

The Remus sounds pretty good on videos, where abouts are you located?
I'm in Shropshire, so a bit of a trek from your neck of the woods I'm afraid!
I'm quite interested in the Remus. Read reports of Milltek's rattling and some where they just flat out dont work the valved dont work which doesnt scream build quality. Do you have the non-res with downpipe & did you need to do any modifications on the car to accomdate it, is there any drone in comfort mode on the motorway?
It was fitted when I bought the car so I'm not 100% on the configuration, but I'm pretty sure it's just the cat-back. I keep meaning to jack it up and get a proper look at it.

In comfort mode it's very refined, no drone to speak of and with valves closed its not even very loud outside the car. Valves open and engine warm, pops and bangs at will :)

User avatar
SiPie
Neutral
Posts: 6
Joined: Wed May 26, 2021 10:59 pm

Re: B9 Milltek exhaust owners in UK

Post by SiPie » Thu Feb 03, 2022 7:12 pm

Slightly off topic but how did you find Redline to deal with Ben ?

My experience was ‘mixed’ shall we say !
Current: 2021 A4 Allroad 2.0tfsi 265bhp Terra Grey
Sold: 2019 B9 RS4 Glacier White
Sold: 2018 B9 S4 Daytona

User avatar
RS4John
3rd Gear
Posts: 364
Joined: Mon Apr 25, 2016 7:59 am

Re: B9 Milltek exhaust owners in UK

Post by RS4John » Sun Feb 06, 2022 12:32 pm

An alternative would be to get the existing exhaust modified - my current F3 RSQ3 was modded by Paul @ PCW near Milton Keynes. He removes the exhaust from the car, opens the silencer boxes from the top (invisible when fitted back to the car), rearranges the internals and welds back up again. So in my case I have a much better sound (deep rumble) at idle low revs around town and something completely mental when the valves are open at higher revs.

I also have (and would recommend) a Cete AVC - exhaust valve controller which enables control of the valves. Open by default in Dynamic, but can be reversed with a double press of the ESC switch, also in all the other Drive Select Modes the valve can be opened/closed at will using the ESC switch.
2020 F3 RSQ3 Std, 400PS, Daytona Grey/black Ara blue interior, Pano, C&S pack, Red calipers, HBA, TP monitoring, 5yr Warranty, Cete AVC, EBC Redstuffs
Gone, 2016 8U RSQ3 Performance
Gone, 2018 B9 RS4
Gone, 2015 8U RSQ3

elchet
2nd Gear
Posts: 111
Joined: Thu Jun 10, 2021 5:45 pm

Re: B9 Milltek exhaust owners in UK

Post by elchet » Sat Feb 12, 2022 3:31 pm

RS4John wrote:
Sun Feb 06, 2022 12:32 pm
An alternative would be to get the existing exhaust modified - my current F3 RSQ3 was modded by Paul @ PCW near Milton Keynes. He removes the exhaust from the car, opens the silencer boxes from the top (invisible when fitted back to the car), rearranges the internals and welds back up again. So in my case I have a much better sound (deep rumble) at idle low revs around town and something completely mental when the valves are open at higher revs.
That sounds great! Have you got a video of the sound by any chance?
2018 B9 RS4 Daytona Grey

User avatar
RS4John
3rd Gear
Posts: 364
Joined: Mon Apr 25, 2016 7:59 am

Re: B9 Milltek exhaust owners in UK

Post by RS4John » Mon Feb 14, 2022 1:20 am

Not much point sharing a video of a howling 5 pot! However check this out:

https://www.facebook.com/watch/?v=3603810249747148
2020 F3 RSQ3 Std, 400PS, Daytona Grey/black Ara blue interior, Pano, C&S pack, Red calipers, HBA, TP monitoring, 5yr Warranty, Cete AVC, EBC Redstuffs
Gone, 2016 8U RSQ3 Performance
Gone, 2018 B9 RS4
Gone, 2015 8U RSQ3

Post Reply

Return to “RS4 (B9 Typ 8W) 2017-”

Who is online

Users browsing this forum: No registered users and 56 guests