Page 4 of 9
Re: JamesBaby’s B7 RS4 Avant Daytona
Posted: Sun Sep 08, 2019 5:53 pm
by jamiej
Thanks dude. Looks like a good bit of kit. Presumably it doesn't upset the handling or make the ride too stiff?
Sent from my ONEPLUS A6013 using Tapatalk
Re: JamesBaby’s B7 RS4 Avant Daytona
Posted: Sun Sep 08, 2019 7:13 pm
by Quango86
jamiej wrote: ↑Sun Sep 08, 2019 5:53 pm
Thanks dude. Looks like a good bit of kit. Presumably it doesn't upset the handling or make the ride too stiff?
Sent from my ONEPLUS A6013 using Tapatalk
Iv just done the exact same job to mines. It doesn't feel much stiffer than standard but definitely tightens things up! Only thing I added in extra to that was new front wheel bearings while I was in there
Re: JamesBaby’s B7 RS4 Avant Daytona
Posted: Sun Sep 08, 2019 11:33 pm
by JamesBaby
As above. Doesn’t stiffen anything. Just makes it feel more solid and planted. 4 wheel alignment mandatory.
Sent from my iPhone using Tapatalk
Re: JamesBaby’s B7 RS4 Avant Daytona
Posted: Tue Sep 24, 2019 4:04 pm
by HarpreetSingh
JamesBaby wrote: ↑Tue May 07, 2019 11:28 pm
Update. Overhauled the brake calipers, discs and pads.
I bought front discs from Reyland Motorsport for £340 delivered, just before the price change
Thing of beauty these are. You have to use your standard bells from Oem or Brembo aftermarket discs.
I bought new bolts from mtecbrakes.com as my old ones were looking poor. I didn’t want issues when I took them apart and for £6 for 20 it was a no brainier.
https://www.mtecbrakes.com/m6-x-30mm-bo ... asher.html
You can also get the spring clamps and H type bobbins from them too if needed but mine were ok on my bells.
I soaked them all in Bilt Hamber Deoc-C corrosion remover. They came out great. Including the Caliper pins and spring clamps.
I cleaned the hubs until they were surgically clean. Do not put layers of grease or paint etc on hubs. It will cause you run out and vibration issues. Clean, WD40, and leave be.
Being OCD, I don’t like the discs getting a rusty unswept area on the disc face. So I made a mask and painted around 5-7 mm in a circle with high temp silver paint. So hopefully this will keep it silver looking.
I also had the front calipers fully refurbed by Jonny at Brake Caliper Refurbs. They blast them to bare metal, strip all components, replace any defective item, plate all exposed workings, and install new bleed nipples.
I had the standard oem black ones but had them redone in Speed Yellow.
They look well installed.
The rears were also done. I managed to bag a great carparts4less deal on the rear discs.
I bought new calipers for the rear and painted and lacquered them myself.
Some pics of the final install.
I had problems upgrading my brake hoses to stainless braided ones. The hard line connectors are corroded and I damaged a hard line which had to be replaced. So doing the hoses will be revisited at a later date.
I used DS2500 pads and now that everything has some miles on it and bedding in, the bite is nice and sharp and the stopping power is great.
Sent from my iPhone using Tapatalk
Really helpful stuff here, going through the process of having my discs and pads replaced too. Like you, I got mine from Reyland so passed it onto the garage for them to do the hard work!!
Cars absolutely pukka!
Re: JamesBaby’s B7 RS4 Avant Daytona
Posted: Wed Sep 25, 2019 11:19 pm
by JamesBaby
Thanks man. I do love driving it.
Sent from my iPhone using Tapatalk
Re: JamesBaby’s B7 RS4 Avant Daytona
Posted: Thu Oct 24, 2019 9:00 am
by JamesBaby
So I recently updated the RNS-E with the later LED screen version. It does work and calculate routes much faster. I also got a genuine 2019 map disc.
Then I also changed the I-Pod doc to the AMI module together with a Tune2Air Bluetooth module. Sound quality is better and I can now view track listing directly on the head unit.
I have an iPod dock and Tune2Air Bluetooth module for sake if someone wants to swap out their CD changer for one.
Sent from my iPhone using Tapatalk
Re: JamesBaby’s B7 RS4 Avant Daytona
Posted: Thu Oct 24, 2019 12:51 pm
by Weiß-sechs
Nice, looks neat.
Prawn cocktail crisps though??
Re: JamesBaby’s B7 RS4 Avant Daytona
Posted: Thu Oct 24, 2019 2:24 pm
by JamesBaby
Haha. I’m addicted to crisps.
Sent from my iPhone using Tapatalk
Re: JamesBaby’s B7 RS4 Avant Daytona
Posted: Mon Nov 04, 2019 11:14 pm
by Toady1
car looks great! How many miles has it done?
JamesBaby’s B7 RS4 Avant Daytona
Posted: Tue Nov 05, 2019 11:14 pm
by JamesBaby
Toady1 wrote:car looks great! How many miles has it done?
Hit 108k. Just nicely run in.
Just been on a 2300mile euro trip in it. Didn’t miss a beat.
EDIT: edited typo
Sent from my iPhone using Tapatalk
Re: JamesBaby’s B7 RS4 Avant Daytona
Posted: Fri Nov 08, 2019 4:56 am
by DavidRS4
You’ve got to love it when a high performance car doesn’t skip a beat
Re: JamesBaby’s B7 RS4 Avant Daytona
Posted: Thu Dec 12, 2019 8:54 pm
by OMN25
Wow very impressive and some genuinely good information, I’ve just bought one and I hope I can get it somewhere near as nice as yours.
Andy
Re: JamesBaby’s B7 RS4 Avant Daytona
Posted: Wed Jan 08, 2020 9:20 pm
by JamesBaby
Well I’ve taken a deposit and the car is sold. First person who saw it bought it.
Not sure I’ve done the right thing. It is an awesome car and I loved driving it. But alas baby on the way and 25k miles a year I’m trying to have a sensible head on.
Will still hang around the forum though.
Sent from my iPhone using Tapatalk
Re: JamesBaby’s B7 RS4 Avant Daytona
Posted: Mon Jan 24, 2022 8:46 pm
by JamesBaby
Well I’m back in a B7 RS4 Avant again after having a stint with an M4, and then recently a riviera blue B8.
Will carry this thread on as there’s lots of info in it.
Sent from my iPhone using Tapatalk
Re: JamesBaby’s B7 RS4 Avant Daytona & Phantom
Posted: Thu Jan 27, 2022 2:30 pm
by JamesBaby
Well the first upgrade is completed. The EM Tuning LED light kit replaces all the internal halogen bulbs to LED giving a fresher modern light colour. Also included the front sidelight & DRL in LED as well. New xenon Osram D1S to be installed tomorrow when the bumper comes off.
I also applied the silcone rubber treatment mentioned near the start of this thread. This was applied to all the rubber door seals. Mine were in excellent condition this time but I did it anyway. It helps with cabin noise too as the seals can create noise during driving.
I also added some soft velcro to the parcel shelf hook to remove the noise it makes as it flexes during driving. Car is near silent now.
Pictures will be added in due course.
