RS55 VAG's B7 RS4 Build Thread - carbon clean, forge oil cooler, plugs, filters etc
Re: RS55 VAG's B7 RS4 Build Thread
Cleaned ports over the course of 2days, speak plugs replaced.. Not that they really needed doing, and relocated the non return valve under the manifold (black and white round attachment) to under the front engine cover.
They have a tenancy to fail over time and I really don't fancy removing the manifold again just for those little valve.
Also deliberately left out the port dividers for higher peak air flow and smoother idle. Didn't deflap the manifold though it requires special plugs to be press fitted in the head after removal of the linkage etc. Maybe a job for the future.
Sent from my SM-G950F using Tapatalk
They have a tenancy to fail over time and I really don't fancy removing the manifold again just for those little valve.
Also deliberately left out the port dividers for higher peak air flow and smoother idle. Didn't deflap the manifold though it requires special plugs to be press fitted in the head after removal of the linkage etc. Maybe a job for the future.
Sent from my SM-G950F using Tapatalk
Re: RS55 VAG's B7 RS4 Build Thread
Complete!
Now for a test drive and no better co- pilot than my 83yr old nan!
Result of all the effort... Much smoother idle (not that it was in anyway bad before hand), faster rev range, more pronounced kick above 6k and approx 1sec faster 3k-8k 3rd gear test! So well worth the big effort for this job.
Sent from my SM-G950F using Tapatalk
Now for a test drive and no better co- pilot than my 83yr old nan!
Result of all the effort... Much smoother idle (not that it was in anyway bad before hand), faster rev range, more pronounced kick above 6k and approx 1sec faster 3k-8k 3rd gear test! So well worth the big effort for this job.
Sent from my SM-G950F using Tapatalk
Re: RS55 VAG's B7 RS4 Build Thread - carbon clean, fory6ge oil cooler, plugs, filters etc
Nice write up and pics . Well done for for tackling those jobs yourself . More pics of relocation of that valve please if you have them ?
Re: RS55 VAG's B7 RS4 Build Thread - carbon clean, forge oil cooler, plugs, filters etc
Well done for all the hard work, you must be really pleased with yourself
Sent from my Nexus 6P using Tapatalk
Sent from my Nexus 6P using Tapatalk
Re: RS55 VAG's B7 RS4 Build Thread - carbon clean, forge oil cooler, plugs, filters etc
Thanks guys.
Yep it's really rewarding doing the work myself. Firstly because it saves on labour costs, secondly because I know it's been done properly, thirdly because I enjoy doing it.
Loving the RS, it's just a complete different beast from the previous cars I have had (all VAG of course).
Sent from my SM-G950F using Tapatalk
Yep it's really rewarding doing the work myself. Firstly because it saves on labour costs, secondly because I know it's been done properly, thirdly because I enjoy doing it.
Loving the RS, it's just a complete different beast from the previous cars I have had (all VAG of course).
Sent from my SM-G950F using Tapatalk
Re: RS55 VAG's B7 RS4 Build Thread - carbon clean, fory6ge oil cooler, plugs, filters etc
Hey thanks.dhali wrote:Nice write up and pics . Well done for for tackling those jobs yourself . More pics of relocation of that valve please if you have them ?
I don't have any photos at the moment. It basically involves getting approx
600mm of 4mm ID / 8mm OD vac hose and connecting to the small underside connection of the inlet manifold. Then connecting the valve once the manifold is in place. Then a cable tie to hold it on the front engine cover.
Sent from my SM-G950F using Tapatalk
- Surrey Sam
- Cruising
- Posts: 4195
- Joined: Tue Nov 27, 2012 7:34 pm
- Location: Sussex
Re: RS55 VAG's B7 RS4 Build Thread - carbon clean, forge oil cooler, plugs, filters etc
You had the seller remove Ceramics for a Steel setup?
Sepang Blue B8 RS4, MY14, All option packs, B&O, Adv Key, Adapt Cruise, Pan Roof, Akrapovic Titanium Exhaust, + more.
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Re: RS55 VAG's B7 RS4 Build Thread - carbon clean, forge oil cooler, plugs, filters etc
Haha I thought someone would be eagle eyed there!Surrey Sam wrote:You had the seller remove Ceramics for a Steel setup?
It had ceramics but the seller then sold them seperately and exchanged them for a new set of steels plus cash his way. He knocked £1.5k off the asking price as a result.
I initially wanted to keep the ceramics however then I noticed they have a number of not so insignificant chips on the OD of the rotors and then I saw the replacement price from Audi £3.4k each!
Sent from my SM-G950F using Tapatalk
- Surrey Sam
- Cruising
- Posts: 4195
- Joined: Tue Nov 27, 2012 7:34 pm
- Location: Sussex
Re: RS55 VAG's B7 RS4 Build Thread - carbon clean, forge oil cooler, plugs, filters etc
Ahhh, makes sense now. The ceramics are now fitted to a forum members car on here.
Welcome to the RS4 club and nice start to a ownership thread
Welcome to the RS4 club and nice start to a ownership thread
Sepang Blue B8 RS4, MY14, All option packs, B&O, Adv Key, Adapt Cruise, Pan Roof, Akrapovic Titanium Exhaust, + more.
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
-
- 4th Gear
- Posts: 594
- Joined: Tue Nov 13, 2012 1:49 pm
Re: RS55 VAG's B7 RS4 Build Thread - carbon clean, forge oil cooler, plugs, filters etc
Welcome aboard the forum buddy!!!
Car looks mint and well done on the diy brilliant work!!!
Car looks mint and well done on the diy brilliant work!!!
Re: RS55 VAG's B7 RS4 Build Thread - carbon clean, forge oil cooler, plugs, filters etc
Well done on all the hard work, looks like you added 1 horse power. Well worth bringing your RS4 back to full fettle.
Great thread too, I'm subscribed
Great thread too, I'm subscribed
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
-
- Neutral
- Posts: 25
- Joined: Mon Oct 30, 2017 1:31 am
Who is online
Users browsing this forum: No registered users and 29 guests