Audi RS6 Performance C7
- Jack Falla
- 1st Gear
- Posts: 66
- Joined: Sat Nov 19, 2016 10:49 pm
- Location: Guernsey CI
- Contact:
Audi RS6 Performance C7
Here is my October 2016 Audi RS6 Performance C7.
Current Mods - H&R 40mm Springs - Milltek Valve Delete Modules - 15mm Rear Spacers - Black Badges
Mods to be fitted - Bespoke 55mm H&R Springs Rear - 21" Rotiform SFO Forged Matte Black Wheels - Milltek Turbo Back Non-Res Exhaust System - Gloss Black Audi Rings - Gloss Black RS6 Badges - Gloss Black Grill Trim, Front and Rear Bumper Trims, Grill Trim and Mirrors - Carbon Fiber Window Surrounds.
ABT 735bhp
Lamborghini Squadra Corse
RDC Automotive Group Ltd
Lordes Luxury Car Storage
Lordes Detailing Devision
FEYNLAB CI
Cars & Coffee CI
RDC Automotive Group Ltd
Lordes Luxury Car Storage
Lordes Detailing Devision
FEYNLAB CI
Cars & Coffee CI
Re: Audi RS6 Performance C7
Nice rolling shot!
I like the sound of the bespoke springs, I didn't know they offered that service. I think I'd have to lose the rear spacers if I went lower at the rear. Can't decide whether I should put the 20mm springs in the fron then space them out to match the rear or leave it low... I do like it low though!
I'm keen to see how the trim turns out. I'm doing the carbon conversion on mine as you know but that leaves the window trims and roof rails in titanium still.
I like the sound of the bespoke springs, I didn't know they offered that service. I think I'd have to lose the rear spacers if I went lower at the rear. Can't decide whether I should put the 20mm springs in the fron then space them out to match the rear or leave it low... I do like it low though!
I'm keen to see how the trim turns out. I'm doing the carbon conversion on mine as you know but that leaves the window trims and roof rails in titanium still.
Re: Audi RS6 Performance C7
Nice
Thought you'd been cloned for a minute there Mike!
Thought you'd been cloned for a minute there Mike!
RS6 C8 carbon black(merlin)
RS6 C8 launch edition
R8 V10 plus
C7 RS6 PE dynamic pack plus
C7 RS6
Porsche Panamera Turbo
C6 RS6 AVANT
RS4 B7
Golf R32 mk 5
BMW M3 E46
Golf R32 mk 5
Golf GTI mk 5
VW Passat 130d 4 motion
VW bora 150pd
Ford Mondeo Ghia X V6
Ford Focus zetec
Rover 214!!
RS6 C8 launch edition
R8 V10 plus
C7 RS6 PE dynamic pack plus
C7 RS6
Porsche Panamera Turbo
C6 RS6 AVANT
RS4 B7
Golf R32 mk 5
BMW M3 E46
Golf R32 mk 5
Golf GTI mk 5
VW Passat 130d 4 motion
VW bora 150pd
Ford Mondeo Ghia X V6
Ford Focus zetec
Rover 214!!
Re: Audi RS6 Performance C7
That's a good pic!
When's someone gonna put some decent concave wheels on a C7 though, imo oem are poop.
When's someone gonna put some decent concave wheels on a C7 though, imo oem are poop.
previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.
Now - Empty garage
If you don't know where you're going, any road will take you there!
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.
Now - Empty garage
If you don't know where you're going, any road will take you there!
Re: Audi RS6 Performance C7
chunky79 wrote:That's a good pic!
When's someone gonna put some decent concave wheels on a C7 though, imo oem are poop.
Re: Audi RS6 Performance C7
Well you got me, decent concave, bit not feelin the design.
previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.
Now - Empty garage
If you don't know where you're going, any road will take you there!
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.
Now - Empty garage
If you don't know where you're going, any road will take you there!
- Jack Falla
- 1st Gear
- Posts: 66
- Joined: Sat Nov 19, 2016 10:49 pm
- Location: Guernsey CI
- Contact:
Re: Audi RS6 Performance C7
I like it low too, hence the bespoke springs. Im hoping its worth it. I think the spacers will be ok, I have 15mm on the rear and there is plenty of arch gap to go lower.MikeFish wrote:Nice rolling shot!
I like the sound of the bespoke springs, I didn't know they offered that service. I think I'd have to lose the rear spacers if I went lower at the rear. Can't decide whether I should put the 20mm springs in the fron then space them out to match the rear or leave it low... I do like it low though!
I'm keen to see how the trim turns out. I'm doing the carbon conversion on mine as you know but that leaves the window trims and roof rails in titanium still.
I will get some picture up when i have them fitted along with the trims done in gloss black. I do like the titanium but want that all black look.
Lamborghini Squadra Corse
RDC Automotive Group Ltd
Lordes Luxury Car Storage
Lordes Detailing Devision
FEYNLAB CI
Cars & Coffee CI
RDC Automotive Group Ltd
Lordes Luxury Car Storage
Lordes Detailing Devision
FEYNLAB CI
Cars & Coffee CI
- Jack Falla
- 1st Gear
- Posts: 66
- Joined: Sat Nov 19, 2016 10:49 pm
- Location: Guernsey CI
- Contact:
Re: Audi RS6 Performance C7
The Rotiforms that I am putting on do have a decent concave on them. They are like the image i have attached but in a matte black just to add some contrast.chunky79 wrote:That's a good pic!
When's someone gonna put some decent concave wheels on a C7 though, imo oem are poop.
Lamborghini Squadra Corse
RDC Automotive Group Ltd
Lordes Luxury Car Storage
Lordes Detailing Devision
FEYNLAB CI
Cars & Coffee CI
RDC Automotive Group Ltd
Lordes Luxury Car Storage
Lordes Detailing Devision
FEYNLAB CI
Cars & Coffee CI
Re: Audi RS6 Performance C7
Not really seen much on here with aftermarket alloys. I like 65% of the pics posted Mike.
previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.
Now - Empty garage
If you don't know where you're going, any road will take you there!
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.
Now - Empty garage
If you don't know where you're going, any road will take you there!
- Jack Falla
- 1st Gear
- Posts: 66
- Joined: Sat Nov 19, 2016 10:49 pm
- Location: Guernsey CI
- Contact:
Re: Audi RS6 Performance C7
The RS6 goes into the bodyshop first thing tomorrow to have all titanium trims pained in black. I am in two minds whether I go for gloss black like the standard grill or I go matte black to add some variation. Any thoughts?
I will post pictures as soon as I collect the car.
I will post pictures as soon as I collect the car.
Lamborghini Squadra Corse
RDC Automotive Group Ltd
Lordes Luxury Car Storage
Lordes Detailing Devision
FEYNLAB CI
Cars & Coffee CI
RDC Automotive Group Ltd
Lordes Luxury Car Storage
Lordes Detailing Devision
FEYNLAB CI
Cars & Coffee CI
Re: Audi RS6 Performance C7
I'd go gloss I think.
- Jack Falla
- 1st Gear
- Posts: 66
- Joined: Sat Nov 19, 2016 10:49 pm
- Location: Guernsey CI
- Contact:
Re: Audi RS6 Performance C7
That was the plan but a second opinion always helps. Have been told my springs wont be here until Mid Jan im inpatient when it comes to waiting for parts!
I am wondering if i should get the front doors stripped down while at the bodyshop so I can get the front windows tinted. Just hate having doors stripped as they never seem to sound quite the same when you close them.
I am wondering if i should get the front doors stripped down while at the bodyshop so I can get the front windows tinted. Just hate having doors stripped as they never seem to sound quite the same when you close them.
Lamborghini Squadra Corse
RDC Automotive Group Ltd
Lordes Luxury Car Storage
Lordes Detailing Devision
FEYNLAB CI
Cars & Coffee CI
RDC Automotive Group Ltd
Lordes Luxury Car Storage
Lordes Detailing Devision
FEYNLAB CI
Cars & Coffee CI
Re: Audi RS6 Performance C7
How long will it take to get the car back with the new look? I've got some bits waiting to be deliveted / fitted to mine and I can't wait but no spare time at the moment.
That's a long wait for the springs, but it'll soon be Christmas then mid January before you know it.
That's a long wait for the springs, but it'll soon be Christmas then mid January before you know it.
- Jack Falla
- 1st Gear
- Posts: 66
- Joined: Sat Nov 19, 2016 10:49 pm
- Location: Guernsey CI
- Contact:
Re: Audi RS6 Performance C7
I am hoping tuesday evening wednesday latest.
Id also like to have the rear and front lights tinted but unsure whats the best way to do this? dont want them painted. I did see that the red RS6 on this forum had the roof bars wrapped in black. do you know if this looks any good? not something i would do but intrigued as to how well that turns out.
What bits to you have to go on? Havent seen any IG posts of your car for a long time. I have gone a bit crazy with car posts lately!!
Id also like to have the rear and front lights tinted but unsure whats the best way to do this? dont want them painted. I did see that the red RS6 on this forum had the roof bars wrapped in black. do you know if this looks any good? not something i would do but intrigued as to how well that turns out.
What bits to you have to go on? Havent seen any IG posts of your car for a long time. I have gone a bit crazy with car posts lately!!
Lamborghini Squadra Corse
RDC Automotive Group Ltd
Lordes Luxury Car Storage
Lordes Detailing Devision
FEYNLAB CI
Cars & Coffee CI
RDC Automotive Group Ltd
Lordes Luxury Car Storage
Lordes Detailing Devision
FEYNLAB CI
Cars & Coffee CI
Who is online
Users browsing this forum: No registered users and 120 guests