Page 8 of 9

Re: Charger build thread

Posted: Thu Feb 08, 2018 2:26 pm
by Lukes3
DavidRS4 wrote:
Thu Feb 08, 2018 1:34 pm
Hope the paddle isn’t too much of an on/off feel
And me but its the only one i can find that is rated to take the extra power.
I know people say the oem one is ok to a point, but so far mine keeps getting hot if i give it the beans.

Re: Charger build thread

Posted: Thu Feb 08, 2018 5:55 pm
by DavidRS4
What about the JHM ones?

Re: Charger build thread

Posted: Thu Feb 08, 2018 8:32 pm
by Lukes3
They have to work with there flywheel, im not changing the flywheel yet

Re: Charger build thread

Posted: Mon Mar 05, 2018 12:22 am
by Lukes3
Update,
The sachs sintard paddle clutch with the sachs performance pressure plate has been fitted, only drove the car about a mile due to the weather but first thoughts are good, nice an easy on the foot if i didnt tell you it had a performance clutch you wouldn't of known. There is a slight bit of judder when pulling away but it hasnt even bedded in yet so we will see in a few mile.

Re: Charger build thread

Posted: Sat Mar 10, 2018 7:26 pm
by DavidRS4
Sounds promising.

Re: Charger build thread

Posted: Sun Oct 07, 2018 11:57 pm
by andyg72
Only just read this luke needs more pictures mate
Here’s mine trying to keep him behind :)

Lovely motor Image

Image


Sent from my iPhone using Tapatalk

Re: Charger build thread

Posted: Mon Oct 08, 2018 10:23 am
by Lukes3
Cheers mate, not updated it in awhile.
Only thing done really is changed the aircon pump and new set of spark plugs.
Oh an put a pipe on the water tank to stop water goimg on everything in the engine bay. Was looking a mess

Re: Charger build thread

Posted: Thu Oct 11, 2018 6:19 am
by DavidRS4
How is the clutch?

Re: Charger build thread

Posted: Thu Oct 11, 2018 9:39 pm
by Lukes3
DavidRS4 wrote:
Thu Oct 11, 2018 6:19 am
How is the clutch?
It works great, no slipping at all, can launch the car hard an it will take it, just dont like a judder its got on soft pull off.

Re: Charger build thread

Posted: Fri Nov 23, 2018 6:40 pm
by Lukes3
Update on this.
Had a on going issue with the air in take temp sensor since fitting this kit in march 2017, some times working some times not.
Freeze frame reading -40!?.
Had a word with mrc (doug) about this an they said at the time it wont be a problem with sensor because its a genuine part.
Checked wiring an all is good an done other checks aswell.
Anyway had enough last weekend an striped it down an pulled the “genuine sensor” out, turns out its not genuine!
In all fairness to MRC they didnt know this crap sensor as you will see in pictures was been supplied by TTS. It even had plastic on the terminals of the sensor!
Refitted with a bosch unit an all is well, no fault codes and silly -40 readings.
So just a thing to look out for with anyone else with a tts kit.

Re: Charger build thread

Posted: Sun May 26, 2019 7:23 am
by Lukes3
New brakes fitted thanks to vagbremtechnic nice bit of kit these are, with ap racing rotors.
Also replaced prop-shaft centre bearing.

Re: Charger build thread

Posted: Sun May 26, 2019 9:25 am
by dhali
Excellent build thread .

Re: Charger build thread

Posted: Sat Aug 03, 2019 9:32 am
by Lukes3
Little update
New things going! Write up soon

Re: Charger build thread

Posted: Tue Aug 20, 2019 5:35 am
by DavidRS4
It’ll be interesting to see if it makes a difference.

Re: Charger build thread

Posted: Tue Aug 27, 2019 11:53 am
by DavidRS4
Any updates?