My RS4 aka VINNIE thread
Re: My RS4 aka VINNIE thread
so finaly had some time to record a little video of the Full JcWeldFab exhaust that i had fitted last week.
originaly was planing to go only for the back boxes but at the end decided to go for a full system.
to say i am happy is an understatement.
its a full system with 2.5" stainless. straight downpipes to 200cel cats, x-pipe section than 2 secondary silencers and finished of with 2 oval black mufflers with valves.
its a work of art.! unfortunatly cant upload pictures just yet but here is the video.
https://youtu.be/6sOIvn0xNiM
not sure how it will sound on mobile devices but fully recomend watching it with LARGE speakers
originaly was planing to go only for the back boxes but at the end decided to go for a full system.
to say i am happy is an understatement.
its a full system with 2.5" stainless. straight downpipes to 200cel cats, x-pipe section than 2 secondary silencers and finished of with 2 oval black mufflers with valves.
its a work of art.! unfortunatly cant upload pictures just yet but here is the video.
https://youtu.be/6sOIvn0xNiM
not sure how it will sound on mobile devices but fully recomend watching it with LARGE speakers
ilya, photographer http://www.ikrylov.com
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
Re: My RS4 aka VINNIE thread
Awesome work mate!!
I must say, it sounds very very similar in tone/character to the full system without the silencers (perhaps a touch less raw and with fewer pops and bangs), so the only major difference must literally just be the volume level. Volume is of course hard to judge on video.
We need to compare on video at some point!
I reckon your setup will be very popular with future customers. The volume level of mine puts a lot of people off.
I must say, it sounds very very similar in tone/character to the full system without the silencers (perhaps a touch less raw and with fewer pops and bangs), so the only major difference must literally just be the volume level. Volume is of course hard to judge on video.
We need to compare on video at some point!
I reckon your setup will be very popular with future customers. The volume level of mine puts a lot of people off.
2007 RS4 B7 Avant
Phantom Black | Black Optics | MRC Stage 2 | JC Weldfab Exhaust | KW V3 coilovers | H&R ARBs | 20" Ispiri ISR-8 | Titanium wing mirrors | Driving Passion Diffuser | CF Air Intake | Manifold deflap | Alcantara/leather retrim | TT RS Steering Wheel | Pioneer Apple Carplay HU, JL amp and sub, Focal components | Clear Headlight Lenses, Black Internals, 6000K Bulbs | Trups LEDs | LED Tail lights |
Re: My RS4 aka VINNIE thread
It actually sound different from inside the car. This has been recorded from outside with two external mics. But yes you right we need a comparison video between yours and mineFaisalJ wrote:Awesome work mate!!
I must say, it sounds very very similar in tone/character to the full system without the silencers (perhaps a touch less raw and with fewer pops and bangs), so the only major difference must literally just be the volume level. Volume is of course hard to judge on video.
We need to compare on video at some point!
I reckon your setup will be very popular with future customers. The volume level of mine puts a lot of people off.
ilya, photographer http://www.ikrylov.com
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
Re: My RS4 aka VINNIE thread
Sounds good !!
Shooting round the one way ind est by Wembley
Shooting round the one way ind est by Wembley
Re: My RS4 aka VINNIE thread
Sounds awesome Ilya! Nice tour past Wembley stadium too.
Takes me back to the days of my RS4 with anti-social exhausts.
Takes me back to the days of my RS4 with anti-social exhausts.
Re: My RS4 aka VINNIE thread
PRETTY DAMN SWEET
Daytona Grey C6 RS6 Avant
Ebony Black C5 RS6 Plus - Gone
Ebony Black C5 RS6 Plus - Gone
Re: My RS4 aka VINNIE thread
Damn that sound good.
My RS4 aka VINNIE thread
So after purchasing pole position seats I had cold feet because they were to small for me. The back was to short and after test fitting my harness I realised that's no bueno... so they had to go. Luckily been sold the next day for exactly what I paid for them win win. While at the AUTOSPORT internation show in Birmingham few weeks ago i found this Corbeau seats. A little cheaper than pole's at retail prices but with no VAT at a show so naturally ordered them. This week been busy fitting them. Made custom rails to hold them down. Alu frames to keep the weigh down and only slider for the drivers side. So in total it's 28.8Kg weigh saving over stock. Some of you might ask BUT why???
1) why not?
2) to preserve the OEM seats for future sale
3) weigh saving because race car
4) much greater support than OEM. And I sit a bit lower.
Next job is porting and deflapping the manifold.
1) why not?
2) to preserve the OEM seats for future sale
3) weigh saving because race car
4) much greater support than OEM. And I sit a bit lower.
Next job is porting and deflapping the manifold.
ilya, photographer http://www.ikrylov.com
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
Re: My RS4 aka VINNIE thread
Very impressive Ilya.
Re: My RS4 aka VINNIE thread
Ilya, I hope you vacuumed that carpet and bought a can of Stella with the change your had rattling around.
Getting to the point, the seats look fit for purpose, you ain't sliding around in those.
Getting to the point, the seats look fit for purpose, you ain't sliding around in those.
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
My RS4 aka VINNIE thread
ha ha yes used this bad boi there was more spare change left so replaced floor mats as well good as new! I have to admit they are a little harder on the bum then OEM...Covkiller wrote:Ilya, I hope you vacuumed that carpet and bought a can of Stella with the change your had rattling around.
Getting to the point, the seats look fit for purpose, you ain't sliding around in those.
picture from this morning:
ilya, photographer http://www.ikrylov.com
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
Re: My RS4 aka VINNIE thread
Sorry to say but they are horrific
Re: My RS4 aka VINNIE thread
I am actually glad you feel this way. At least now I don't have to worry about seats being nicked every time I park it in a dodgy part of london.Deano_123 wrote:Sorry to say but they are horrific
ilya, photographer http://www.ikrylov.com
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
Re: My RS4 aka VINNIE thread
Not a fan of the seats either but each to their own! And have I read that right, that the passenger seat is fixed in place? All to save 23kgs, lol. You crazy bastard.
Real name: Simon, or Si, don't mind either
1.4 Fiesta (Silver)
2.8 VW Bora V6 4motion (Blue)
4.2 Audi RS4 B7 Avant (Black)
1.4 Fiesta (Silver)
2.8 VW Bora V6 4motion (Blue)
4.2 Audi RS4 B7 Avant (Black)
Re: My RS4 aka VINNIE thread
28.5kg and yes it of fixed. But there is room for both rear and from passenger to sit comfortably.MrHilario wrote:Not a fan of the seats either but each to their own! And have I read that right, that the passenger seat is fixed in place? All to save 23kgs, lol. You crazy bastard.
Listen I know some people would hate the idea of swapping original buckets for what seems like a cheap alternative. But at least now I have buckets I can use for my future race car (hopefully Clio 182cup) it take all of 10min to swap back. + OEMs will be in better nick
ilya, photographer http://www.ikrylov.com
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
Who is online
Users browsing this forum: No registered users and 50 guests