Page 2 of 2

Re: RS4 B9 video of 20mm Spacers fitted

Posted: Fri Jul 06, 2018 12:34 pm
by Gio G
Manged to get 15mm on front and rear fitted on my RS5 last week. Just looks so much better... how they should have come out of the factory..

G

Re: RS4 B9 video of 20mm Spacers fitted

Posted: Fri Jul 06, 2018 12:38 pm
by Brooner
Need some before and after pics

Re: RS4 B9 video of 20mm Spacers fitted

Posted: Fri Jul 06, 2018 12:57 pm
by Gio G
Did not take a picture at the same angle unfortunately.. Top is with 15mm, feels out arches..






IMG_4917.jpg

Re: RS4 B9 video of 20mm Spacers fitted

Posted: Fri Jul 06, 2018 1:45 pm
by Terminator_X
Gio G wrote:Manged to get 15mm on front and rear fitted on my RS5 last week. Just looks so much better... how they should have come out of the factory..

G
Where did you buy them from pls?

TX.

Sent from my BBB100-2 using Tapatalk


Re: RS4 B9 video of 20mm Spacers fitted

Posted: Fri Jul 06, 2018 3:10 pm
by Gio G
R-tec Auto design in St Albans. They used Bimecc spacers and new bolts, quite reasonable.

G

Re: RS4 B9 video of 20mm Spacers fitted

Posted: Fri Oct 12, 2018 10:46 pm
by AJ13
I’ve now been running 15mm front and 20mm back for months on it. 20mm was too wide on the front.
I had to remove one clip and screw from the wheel arch but it’s only a tiny one holding in the liner on the arch, and there’s tons extra. If you own anRS4 B9 10mm front and 15 back to be safe, and 15mm front and 20mm back are the biggest. Oh, and I got my spacers and bolts from venom motorsports. Top guys.

Re: RS4 B9 video of 20mm Spacers fitted

Posted: Sat Oct 13, 2018 9:11 am
by Brooner
Thanks for the update on this
For those with the standard 20" this will save others the trial and error process

Re: RS4 B9 video of 20mm Spacers fitted

Posted: Sat Oct 13, 2018 9:36 am
by AJ13
Totally. Remember, 20mm spacers volt into the hub, so you use existing bolts, 15mm spacers you have to use long bolts that go through the wheel and spacer into the hub, so you need approx 15mm longer bolts. You may also want to buy 2 new longer locking wheel nuts, as your old ones on the front won’t work. And don’t forget to removed the horrible screw and clip in the front wheel arches.... it’s only design purpose can be to rub against tyres!

Re: RS4 B9 video of 20mm Spacers fitted

Posted: Mon Jun 17, 2019 7:49 pm
by Ash_RS
Great video AJ13 love the set up. Does anyone have any pictures of an RS4 with 15mm on the front and 20mm on the rear? Also would this cause any rubbing or require any modifications?

Thanks

Re: RS4 B9 video of 20mm Spacers fitted

Posted: Sat Mar 28, 2020 9:06 pm
by quattro
Tx AJ13 for the video, defintely spacers needed on this car imho.
I'm thinking of 10-15mm F/R respectivley, but i ordered my RS4 with 19'' wheels. Do you think it changes a lot? Should I go for the 20mm?
(I need 19'' for winter/road conditions here - Italy)

Re: RS4 B9 video of 20mm Spacers fitted

Posted: Sat Mar 28, 2020 10:11 pm
by AJ13
Use the 10/15 or 15/20. It won’t change much. Definitely with the 19 inch wheels you will have plenty of space with 15 front and 20 back. Stay well over there in Italy bro.

Re: RS4 B9 video of 20mm Spacers fitted

Posted: Thu Sep 24, 2020 9:22 am
by justin3477
Hey Guys

I am looking at fitting Mode spacers 18mm all round on a 2020 Facelift RS4
It has 20inch wheels

Will I have any dramas?

I have no plans on lowering the suspension

Here is a pic of my new car Image


Sent from my iPhone using Tapatalk