Removing b7 2006 front bumper
-
- 1st Gear
- Posts: 83
- Joined: Sat Apr 18, 2015 5:34 pm
Removing b7 2006 front bumper
Does anyone have a guide for this please or any advice as I need to change the ballast and xenon bulbs.
Re: Removing b7 2006 front bumper
http://www.audizine.com/forum/showthrea ... er-Removal
But I think this is marginally better:
http://www.audizine.com/forum/showthrea ... -of-Bumper
Good luck!!!!
But I think this is marginally better:
http://www.audizine.com/forum/showthrea ... -of-Bumper
Good luck!!!!
Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
-
- 1st Gear
- Posts: 83
- Joined: Sat Apr 18, 2015 5:34 pm
Re: Removing b7 2006 front bumper
Thank you very much!
Re: Removing b7 2006 front bumper
Pretty straightforward but be careful with the headlight wash pump at the bottom of the passenger wing (in the bumper) . Due to the way you take the bumper off, the hose can be under a little stress. There is a clip and o-ring attaching the hose to the pump. I would order a spare o-ring from the dealer (or find elsewhere 9mm x 1.6mm IIRC) at c.£1.42 in case it twists. I had to have my bumper off a second time to sort the o-ring after replacing a xenon bulb the first time.
Who is online
Users browsing this forum: No registered users and 71 guests