Where to buy Rotors to fit 380mm MoVit/Brembo/GT2
- johneroberts
- Cruising
- Posts: 4483
- Joined: Sun Dec 29, 2002 11:38 pm
- Location: Clent Hills
- Contact:
Tricky to say Ryan, as it depends what your after.
I would guess anywhere from 25 to 40% over an OPC.
Most of the non OPC places will give similar prices.
As a guide I brought some trim pieces and a new grill for the turbo tail of my 993 and the price difference was a lot more than the cost of the weekend in Gent I treated the wife to in order to go pick the stuff up
I would guess anywhere from 25 to 40% over an OPC.
Most of the non OPC places will give similar prices.
As a guide I brought some trim pieces and a new grill for the turbo tail of my 993 and the price difference was a lot more than the cost of the weekend in Gent I treated the wife to in order to go pick the stuff up

Too many toys, not enough time
- johneroberts
- Cruising
- Posts: 4483
- Joined: Sun Dec 29, 2002 11:38 pm
- Location: Clent Hills
- Contact:
- johneroberts
- Cruising
- Posts: 4483
- Joined: Sun Dec 29, 2002 11:38 pm
- Location: Clent Hills
- Contact:
Managed to get the new rotors in the end, and very good they are too
They were ordered direct from Porsche (had to come from Germany as apparently there were none in UK dealer network at the time). I have posted the part numbers below for the two front rotors as you may find this useful if you are on the look out for replacements:
P993.351.407.87 N/STOCK BRAKE DISC
P993.351.408.87 N/STOCK BRAKE DISC
Also used the following sundry parts too:
P900.378.030.09 HEX.COLLAR (20 of these)
PN .010.210.13 HEX.SCREW (4 of these)
Hope this is of use.
Andy

They were ordered direct from Porsche (had to come from Germany as apparently there were none in UK dealer network at the time). I have posted the part numbers below for the two front rotors as you may find this useful if you are on the look out for replacements:
P993.351.407.87 N/STOCK BRAKE DISC
P993.351.408.87 N/STOCK BRAKE DISC
Also used the following sundry parts too:
P900.378.030.09 HEX.COLLAR (20 of these)
PN .010.210.13 HEX.SCREW (4 of these)
Hope this is of use.
Andy
Who is online
Users browsing this forum: Brooner and 13 guests