Using rev counter for FATS

Post by **hethers** » Tue Apr 10, 2007 3:06 pm

How accurate is it? As you'll see below I have estimated my quickest FATS at 3.1 secs with a stage 1 MRC remap. This was done using quicktime and looking at the video's frame times on the computer (accurate to 0.01 secs).

This seems too fast when comparing to the mrc database!

http://www.youtube.com/watch?v=yxlfwThMgq0

http://www.youtube.com/watch?v=R1wkmbNNE4s

Post by **hethers** » Tue Apr 10, 2007 3:09 pm

PS my voice isn't normally that high pitched

Post by **GrahamS4** » Tue Apr 10, 2007 3:30 pm

I think you have answered your own question. Unless your stage 1 S4 is massivly faster than all the stage 3+ cars in the MRC database, your method is bad. I know which I think is the case!

Post by **jeffw** » Tue Apr 10, 2007 4:18 pm

Stage 1 RS4....still fast by maybe .8 sec or so

Post by **GrahamS4** » Tue Apr 10, 2007 4:27 pm

Ah RS4. Given the rpms and the times I don't think you can really use the analog rev counter and the frames from a video to time this, it just isn't going to be anywhere close enough.

Post by **Crunchster** » Wed Apr 11, 2007 4:11 pm

Get VAG-COM and silence those doubters

Post by **ScottyBoy** » Fri Apr 13, 2007 9:49 pm

hethers wrote:How accurate is it? As you'll see below I have estimated my quickest FATS at 3.1 secs with a stage 1 MRC remap. This was done using quicktime and looking at the video's frame times on the computer

A little optimistic i think.

Post by **hethers** » Sat Apr 14, 2007 12:09 am

FATS vag-comed at 3.5

Post by **GrahamS4** » Sat Apr 14, 2007 8:15 am

Not that far out, good time. At least you have an accurate figure now and all the other benefit ofvagcom.

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Using rev counter for FATS

Using rev counter for FATS

RE: Using rev counter for FATS

RE: Using rev counter for FATS

RE: Using rev counter for FATS

RE: Using rev counter for FATS

RE: Using rev counter for FATS

Re: Using rev counter for FATS

RE: Re: Using rev counter for FATS

RE: Re: Using rev counter for FATS

Who is online