Retro Fitting puddle lights

2.5 I5 20v TFSI - 362 bhp
2.5 I5 20v TFSI - 395 bhp
Post Reply
Micko4567
Neutral
Posts: 3
Joined: Tue Jan 01, 2019 11:30 am

Retro Fitting puddle lights

Post by Micko4567 » Tue Jan 01, 2019 11:45 am

Recently brought an RS3 and noticed that the previous owner hadn't had the lighting pack fitted. Slightly gutted as I've been given projector puddle lights showing the RS3 emblem. After looking round seen videos ect showing that they can be fitted to the older models but nothing newer than 2015. Also struggling to find the VAG COM to tell the car that there will be a light source using power in the door as I've read it's been switched off due to the lighting pack not being installed at the factory. Any help would be greatly appreciated.

User avatar
MikeFish
Cruising
Posts: 14485
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Retro Fitting puddle lights

Post by MikeFish » Tue Jan 01, 2019 11:48 am

Are puddle lights really only supplied as part of the lighting pack? Are you saying you have no lights in the bottom of your doors? Or the red ones when the door is open?
RS6 Performance Panther Black KW Adjustable springs, Milltek Non-Res, exhaust valves disconnected & valve delete units fitted, TSW Bathurst, Eventuri intake

RS6 build thread: http://forum.rs246.com/viewtopic.php?f=76&t=119147

Micko4567
Neutral
Posts: 3
Joined: Tue Jan 01, 2019 11:30 am

Re: Retro Fitting puddle lights

Post by Micko4567 » Tue Jan 01, 2019 1:14 pm

It's just the reflector on the side of the door card no light at the bottom but there is a mould where the light would have gone. From what I've read it's on available as part of the lighting pack which as you probably know it covers footwell lighting cup holders door shuts ect.

Post Reply

Return to “RS3 (8VA) 2015-”

Who is online

Users browsing this forum: No registered users and 1 guest