Stolen/Recovered RS2

2.2 I5 20v turbo - 315 bhp
Post Reply
tester
Neutral
Posts: 3
Joined: Tue Jun 14, 2005 7:39 am

Stolen/Recovered RS2

Post by tester » Tue Jun 14, 2005 7:56 am

Hi there,

I'm new to the forum but have found it very helpful so far. I'm interested in buying an RS2 and have been reading up on the car but have yet to go and view any. I've heard about a RHD volcano black example with 70k on the clock. The problem is that it's recorded as a cat d write off as it has been stolen and subsequently recovered. The seller assures me that the only damage is to locks/ignition. There is also the issue of tracing the service history, though I believe Audi might be able to supply some information on production of a chassis number.

My initial reaction was to steer clear, but having done a little more research into cat d cars, I'm wondering if it's worth a look. The seller seems to want about £9500.

Does anyone have any advice/experience in this area?

GlynRS2
4th Gear
Posts: 571
Joined: Thu Dec 04, 2003 12:22 pm
Location: West Sussex

RE: Stolen/Recovered RS2

Post by GlynRS2 » Tue Jun 14, 2005 1:25 pm

Robo is probably the best man to talk to, as he bought his from a salvage agent as stolen recovered I think.
Glyn
Navarra Blue RS6 Vorsprung (C8)
Sepang Blue RS6 Performance (C7) - sold
Sepang Blue S5 sportback (B8.5)- sold
Monza Silver RS6 (C6) - sold
Sprint Blue RS4 (B7) - sold
Polar Silver RS2 (B4) - sold

richslay
Neutral
Posts: 31
Joined: Mon Jan 24, 2005 3:15 pm

RE: Stolen/Recovered RS2

Post by richslay » Tue Jun 14, 2005 1:26 pm

I looked a volcano black cat d write off recently, sounds like it might be the same car? Was the reg M3** BLO. Regarding audi service history ring 0800699888, they will send you a letter detailing everything they know. But if the reg matches first let me know and i can provide feedback on the car.

tester
Neutral
Posts: 3
Joined: Tue Jun 14, 2005 7:39 am

Post by tester » Tue Jun 14, 2005 3:45 pm

Richslay - thanks for the info but unfortunately I think it must be a different car - the one I've been told about seems to have a private plate on it (which has presumably been transferred off onto another car by the owner). I've only seen photos of the car and there's tape over the plates but it looks like it begins B16. I'll post more info as and when I can.

Thanks for the advice so far.

User avatar
robo
2nd Gear
Posts: 205
Joined: Sat Jul 05, 2003 6:36 pm
Location: essex
Contact:

Post by robo » Tue Jun 14, 2005 8:05 pm

I did see this car on salvage auction and the car has been sold for £ 8600 , and same car at e-flay for £ 9000 with not even one bid.
Reg of the car was M4** UJO.
When buying stolen recov car you have to check everything its so painfull if you pay this kind of money ( 9000)
and you needs 2-3k on top.
That car had no ecu and you could not see milage so I would stay away from it.
You could alway get this
javascript:more_info
http://atsearch.autotrader.co.uk/WWW/ca ... =1&photo=1
thx
rob
just cant get enough of it

User avatar
robo
2nd Gear
Posts: 205
Joined: Sat Jul 05, 2003 6:36 pm
Location: essex
Contact:

Post by robo » Fri Jun 17, 2005 1:41 pm

just cant get enough of it

AAH!
2nd Gear
Posts: 185
Joined: Tue Jun 15, 2004 12:03 am
Location: London

Post by AAH! » Fri Jun 17, 2005 3:32 pm

"one of 60 made right hand drive 320BHP, was mint throughout"

LMAO

Notice that it "was" mint.
RS2 +

tester
Neutral
Posts: 3
Joined: Tue Jun 14, 2005 7:39 am

Post by tester » Fri Jun 17, 2005 4:15 pm

That's the one! And it's not in Wigan either. They keep saying it'll arrive there soon but as far as I'm aware, it's currently in Basildon...

Still £9000, despite not getting any bids last time.

I might take a look if it ever turns up, but unless anyone can shed any more light on it's history I think I'll steer clear...!

martinjs
Neutral
Posts: 23
Joined: Sun May 11, 2003 3:25 am
Location: surrey

Post by martinjs » Fri Jun 17, 2005 5:16 pm

It does need a bit more work than 'just locks', apart from ECU missing as robo says, all the wiring under the steering column is in a right mess, doors are dented around both door locks and the cambelt is very very slack. I thought it had snapped at first. Oh and the rear bumper has a big crack in it.

martin

DucatiEVO
Neutral
Posts: 5
Joined: Thu Jul 14, 2005 2:17 pm

Post by DucatiEVO » Thu Jul 14, 2005 2:50 pm

Prolly why there is no 'ECU', they don't want you starting it in case you discover it's shafted! lol

Post Reply

Return to “RS2 (B4) 1994-1995”

Who is online

Users browsing this forum: No registered users and 39 guests