Page 1 of 1
help: changing my front rs2 disks!
Posted: Thu Jun 02, 2005 11:18 pm
by rs2.pt
Hi all
need some guidance please
I decided to change (at least will try) my rs2 front disks.
I ask if there is any info about the procedure, torque settings etc... fail to find on search arquives...
my disks are those:
RE: help: changing my front rs2 disks!
Posted: Tue Jun 07, 2005 5:38 pm
by B18DRS
simple and straight forward.
Remove wheel.
Remove two bolts holding Caliper to bracket, and remove caliper.
Unscrew two screws holding disk on. remove disk.
replace disk, replace two screws to hold disk on.
reposition caliper, do caliper bolts back up FT.
put wheel back on
Re: RE: help: changing my front rs2 disks!
Posted: Sat Jun 11, 2005 11:02 am
by rs2.pt
B18DRS wrote:simple and straight forward.
Remove wheel.
Remove two bolts holding Caliper to bracket, and remove caliper.
Unscrew two screws holding disk on. remove disk.
replace disk, replace two screws to hold disk on.
reposition caliper, do caliper bolts back up FT.
put wheel back on
thanx B18DRS
yesterday I was on it... and realy is very simple
thought was some complicated issues on there
now I am with a small problem, described on this post:
http://www.rs246.com/index.php?name=PNp ... ic&p=77140
and looking for advice